1/2″ END CAP~ SS304 STAINLESS STEEL PIPE FITTINGS

The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. The use of Forged End Pipe Caps is common in many industries such as oil and gas industries, chemical industries and water supply lines.

What is a sockolet and what about its dimension chart.

Socket weld cross is a pipe fitting used to transport flow in the piping system.SW fittings are belong to forged steel pipe fittings,the other type of forged fitting is threaded fittings.Forged fittings are high pressure fittings used in many applications.

Socket weld elbow is a forged fitting belongs to SW fittings,SW fittings can be socketed with pipes and then welded with the pipes.SW fittings have serive of pressures:Class 3000,Class 6000,Class 9000.Among these,the most used pressure is Class 3000.

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

SW tees have two types:Equal and Reducing.SW fittings have same ranges of size(1/8”-4”) and pressures(2000lb,3000lb,6000lb,9000lb).Class 3000 is the most common used among these pressures.Class 3000 can be labeled as 3M,where M means 1000,class 3000 fittings can withstand up to 3000 PSI.

Socket Weld Fittings Specification
Shape: Elbow, Tee, Cross, Coupling, Union, Cap, Reducing Insert, Sockolet
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Rating: Class 3000lbs, 6000lbs, 9000lbs
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

Threaded fittings are available in pressure ratings Class 2000, 3000, and 6000; Socket welding fittings are available in pressure ratings Class 3000, 6000, and 9000. Generally, both fittings size range is 1/8″- 4″or DN6-DN100.

Carbon Steel: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L，1.4404, 1.4437.
Duplex Stainless Steel: ASTM A182 F51, F53, F44

Size Range: 1/8″ –  4″ / DN6 – DN100
Schedule Chart: STD, XS, SCH 160
Standard: MSS SP-97
Carbon Steel: ASTM A105 / A105N
Low Temp Carbon Steel: ASTM A350 LF2/LF3
Pipeline Steel: ASTM A694 F42/46/56/60/65
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L
Duplex Stainless Steel ASTM A182 F51, F53, F44

ASTM A182 F316 is a popular grade for stainless steel in American Standard.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

SW elbow is used to socket with the end of pipe and welding on it.Socket weld elbow is belong to forged fittings which are used as high pressure fittings,SW fittings can be 2000lb,3000lb,6000lb.

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

CL3000 socket weld tees are the most used pressure pipe fittings because of the wide using range.ASME B16.11 forged pipe fittings are including SW and THD fittings.

Socket welded tee are generally suitable for pipes with a nominal diameter of NPS 2 or less.

A Socket Weld Tube Fittings is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. Once correctly inserted, fillet type sealing welds are applied to join the pipe to the fitting.

Couplings are used to help extend or terminate runs and to change pipe sizes and are designed to provide good flow characteristics. We supplied many A105 carbon steel and 316 stainless steel socket weld fittings to customers. Socket Weld Fittings are a family of high pressure forging fittings that used only in conjunction with ANSI Pipe and are available in the same size range.

Socket welded elbow can socket with pipes and welded on pipes.SW fittings are belong to forged fittings,the other type of forged fitting is threaded fittings.Forged fittings are high pressure fittings used in many applications.

What is a pipe Socklet and its advantages and disadvantages.

What is a SW fiting and how about a SW Elbows’ specification?

Socket Weld 90 Degree Elbow makes 90°changes of course within the run of pipe to create a channeling framework. Socket Weld 90 Elbow is planned for wide utilize totally different industries like oil refineries, chemical processing, petrochemical, and numerous other businesses.

Socket Weld Tee Material: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH

SW full coupling is used to connect two pipes.Couplings can be full coupling and half coupling.ASME B16.11 pipe fittings are forged fittings including SW fittings and THD fittings.Socket weld fittings have many pressures:CL3000,CL6000,CL9000.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45°,90° and 180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.