45 DEG Elbow Diffence With 90 DEG Elbow

Concentric reducer is used to join pipe sections or tube sections on the same axis The length dimension of the reducer is almost equal to the average of the big bore and smaller bore pipe diameters.

Steel pipe elbow is a key parts in a piping system for to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree or 90 degree.

Buttwelding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

The length dimension of the reducer is almost equal to the average of the big bore and smaller bore pipe diameters. Concentric reducers are easy to transport mud and grinding fluid and are suitable for corrosive operations

316L 90 deg elbow is a stainless steel pipe fitting which can used in chemical environment because of its an-ti corrosive function.SCH 10S is repersents to the wall thickness in butt welded fittings. Commonly used wall thickness is SCH 40 and SCH 80.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Butt weld fittings would also be referred to as welded pipe fittings. When these would be used in stainless steel and carbon steel, they would be able to offer certain advantages as compared to socket weld and threaded fittings. Whereas socket weld would only be available up to a specific size, you would find butt weld fittings to be available in sizes starting 1/2 inch to 72 inch.

BW equal tee is always used in piping system to branch the pipes.ASME B16.9 Pipe Fittings are butt welded fittings in American Standard.Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

The elbow radius mean curvature radius. If the radius is the same as pipe diameter, it called short radius elbow, also called SR elbow, normally for low pressure and low speed pipelines. If the radius is larger than pipe diameter, R ≥ 1.5 Diameter, then we call it a long radius elbow (LR Elbow), applied for high pressure and high flow rate pipelines.

A234 WPB elbow is the most chosen carbon steel elbow in all the types of elbows.A234 WPB is carbon steel grade for butt welded fittings;BW elbows have LR (long radius）and SR (short radius).Elbows have 90deg and 48deg to change the direction of the pipe system.

DN950 long radius elbow is one type of large dimension elbows,there is also short radius elbow to choose.ASME B16.9 elbow is butt welded elbow according to American Standard.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

A equal tee’s usage,dimension and features.

The reducing tee has two outlets cut at 90 degrees with the main pipe, and the size of the branch pipe is smaller than the port of the pipeline. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories

In the layout of the pipeline system, long radius elbows should generally be used for connection, and short radius elbows are usually used in places where the installation position of the pipeline system is compact or to reduce costs

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

90 degree elbow, also called “90 bends or 90 elbows”, are manufactured as SR (Short Radius) elbows and LR (Long Radius) elbows.

DN900 LR elbow is large dimension fitting,for the large dimension,the elbows always be butt welded.Wall thickness STD is a commonly used thickness of BW fittings,the other commonly used wall thickness are SCH 40, SCH 80.

A Reducing Tee is a T-shaped pipe fitting with two outlets that cut at 90 degrees to the main line. These tees are available with a combination of diverse outlet sizes. In this, the branch port size is smaller than the other ports of the run.

Reducing tee is used to change the direction and reduce the flow of the fluids or gas.Butt welded pipe fittings can weld with the pipes so that can anti leakage effectively.Tees have two types:Equal Tee and Reducing Tee.The commonly used wall thicknesses for butt welded fittings are SCH STD,SCH 80,SCH 160.

BW tees and reducers are the most used pipe fittings in the piping system.Tees can branch the flow in piping systems.Carbon steel pipe fittings are popular as the great functions and affordable functions.

The connection methods of elbow and pipe include: direct welding (the most common method), flange connection, hot melt connection, electric fusion connection, thread connection and socket connection

What is a straight and reducing tee and Dimensions and Standards

180 deg BW elbow can change the direction of fluids or gas in 1800 degree.Butt welded elbows can also be 90 deg and 45 deg.90 deg elbow and 45 deg elbow are more commonly used than 180 deg elbow.You could find the surmmary ” 45 degree elbow VS 90 degree elbow”.

A234 WPB/WPC BW 90 degree elbows are carbon steel butt welded fittings.Elbows also have 45 degree.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

Large Size 90 Degree Elbow have an improtant use in piping system to transport flow.Carbon steel elbow is the most used material because of the great functions and affordable price.