8” 90 degree elbow painted butt weld SR elbow

Carbon steel elbow dimensions are different depend on the type of the elbow.BW elbows can be 1/2″-80″;SW elbow and THD elbow can be 1/8″-4″.Elbows can be made from carbon steel,alloy steel and stainless steel.Shanghai Zhucheng is an experienced pipe fittings manufacturer for many years.

Stinless steel pipe is always used in many corrosive environments because of the excellent anti-corrosive function,so that the pipes can used for longer years than other materials’ pipes.Shanghai Zhucheng is a superior steel pipe supplier who supplys high quality pipes for years.

A234 WP22 elbow is a alloy steel pipe fitting used in piping systems.A234 WP22 is represents alloy steel butt welded fittings in American Standard.Elbows can manufactured as 45 and 90 deg.These elbows have similar functions,the only difference is 45 degree elbow can changes the direction of pipes in 45 degree while 90 degree elbow can changes in 90 deg.

Steel pipe elbow is an important parts in plumbing pipeline systems and used to change the fluid directions. It ranges in different types as per body material there are stainless steel elbow, carbon steel elbow, and alloy steel;

It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.SR 90 degree elbow is the same as the pipe elbow mentioned above, but the diameter is shorter. Therefore, this kind of steel elbow is often used when space is not enough.A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

BW ELBOW are installed between different lengths pipe or tubing. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

Welded steel pipe is a type of steel pipes,the other type is seamless steel pipe (SMLS).Welded steel pipes also can divided into ERW,SSAW,LASW,DSAW.

Reducing tee is a commonly used fittings to branch the pipes and reduce the flow in the piping systems.Large dimension is for butt welded fittings.ASME B16.9 pipe fittings are BW fittings according to American Standard,the size range for the ASME B16.9 fittings is 1/2″-80″.

Butt Weld Concertric Reducer is the type of pipe fitting which helps to join two pipes with different diameters. There are various material for The pipe reducers as per the demands of industries and also available in many dimensions.

45 deg elbow has three types:BW,SW,THD.Among these,The commonly used elbows can be 45 deg and 90 deg.BW (butt welded) 90 degree elbows have LR (long radius) and SR (short radius) while 45 degree elbows only have LR type.

45 degree elbows have same functions to 90 degree elbows,the only different is 45 deg elbow changes the direction of pipes in 45 deg while the 90 deg elbow changes the direction in 90 deg.BW pipe fittings are popular as its strong and permanent connection.

SS400 90 DEG elbow is used to transport flow in piping system.Butt welded fittings used welded connection to connect with the pipes to achieve the strong and premanent connection.

Stainless elbow is a popular used type of elbow becase the stainless steel has excellent an-ti corrosive function.Shanghai Zhucheng is an excellent butt welded fittings factory who supplys high quality pipe fittings and flanges for years.

Steel Reducing Tee: The branch diameter is smaller than the main line diameter. Tee reducer is usually described as NPS diameters in 4”x 4”x 3”, 4”is the main line pipe diameter, and 3”is the reducing branch

Steel pipe elbow is a key parts in a piping system for to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree or 90 degree.

BW 90 degree elbow is the most used elbow in all types of elbows.BW fittings are popular because it can achieve strong and permanent connection.Stainless pipe fittings are famous for the excellent anti-corrosive function.Shanghai Zhucheng can supply many kinds of pipe fittings made from stainless steel.

Pipe crossing is used where four pipes intersect. The cross pipe may have one inlet and three outlets, or three inlets and one outlet. The diameter of the outlet and inlet can be the same or different.

Steel pipe elbow is a key part in a pressure piping system used to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe and thus the fluid direction turn to a certain direction of 45 degree or 90 degree. This change in fluid flow direction adds pressure losses to the system due to impact, friction and re-acceleration.

90 deg 4D bend is belongs to butt welded fittings.4D means the radius of the bend is 4 times long the dimension of the pipe bend.API A53B is a great of carbon steel materical for pipes and bends in American Standard.

A234 WPB BW reducer has the most wide ragnge of applications in all types of butt welded reducer, because A234 WPB is the most used grade in carbon steel.Carbon steel pipe fittings are accepted in many projects because these fittings have great functions and reasonable price.

Carbon steel elbows are the most commonly used elbows in all the types and material elbows.Large dimensions elbow is butt welded fitting,you can find the butt welded fittings specification below.

LR 90 degree steel pipe elbow are installed between different lengths pipe or tubing. It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.

What is a pipe Tee,its specification and importance.

Buttwelding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS

The function of butt weld elbow is to change direction or flow in a piping system. There are the 45°, 90° and 180° .
According to the material, it can be divided into carbon steel, alloy steel and stainless-steel.
According to its radius of curvature, there are long radius  and short radius butt weld elbow.

Take carbon steel buttweld fittings into a bath of molten zinc. That would get more zinc and make the price is high. We surfaced carbon steel forged fittings with electrogalvanizing because it is pretty and low cost.