Butt Weld Elbow A860 WPHY60

Steel pipe bend two pipes into a certain angle and connects them together to change the direction of the pipe. it could be bend directly from a finished pipe with cold bending processes, to different degrees.

Classify,specification of a BW 90 degree elbow

Carbon steel tee is a commonly used tpye of tees.This is butt welded (BW) carbon steel tee in the picture.it can welded with pipes to achieve permanent connection.Equal tee only can change the direction of the pipes while reducing tee can also reduce the flow of the fluids or gas.

Pipe elbows have three types:THD (threaded),SW (socket weld),BW (butt welded).These elbows used different connections to connect with the pipes in piping system.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel fittings can used over 50 years.

DN900 LR elbow is large dimension fitting,for the large dimension,the elbows always be butt welded.Wall thickness STD is a commonly used thickness of BW fittings,the other commonly used wall thickness are SCH 40, SCH 80.

BW 90 deg elbow is the most used type of elbows in many industries.Schedule 80 is represents the wall thickness of the butt welded fittings.It is a commonly used wall thickness.another wall thickness is SCH 40.

It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.SR 90 degree elbow is the same as the pipe elbow mentioned above, but the diameter is shorter. Therefore, this kind of steel elbow is often used when space is not enough.A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

0 degree elbow, also called “90 bends or 90 elbows”, are manufactured as SR (Short Radius) elbows and LR (Long Radius) elbows.

Butt welded elbow is a commonly used pipe fitting,it can divided as two types:90 deg and 45 deg.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.These are Shanghai Zhucheng Pipe Fittings Manufacturing Co Ltd’s steel pipe fittings packages to ensure that the products are not damaged during transportation.

Lateral tee is a special type of BW tees,it can branch the fluids or gas in 45 deg.Galvanized steel pipe fittings has better anti-corrosive function than normal carbon steel fittings.Galvanized Steel Pipe Fittings have similar corrosion resistance as stainless steel fittings,but more cheaper than stainless steel pipe fittings.

Carbon steel elbow has two degrees:90 deg and 45 deg.In real application,90 deg is more used type.90 deg elbow can be long radius (LR) and short radius (SR) while 45 deg elbow only has long radius (LR).

When short radius elbows are used, the maximum working pressure should not exceed 0.8 times of long radius elbows of the same specification Miter elbows are usually used for large-size pipes with moderate conditions in low pressure (design pressure s2.0mpa), water and similar fluid media

304/316L BW tees are the most used tees in stainless steel tees.304/316L are the most used grades in American Standard.Tees can be Equal Tees and Reducing Tees.You could find the summary “Equal VS Reducing Tee” in the content below.Stainless steel pipe fittings are populat because of the excellent functions of corrosion resistance.

Steel pipe elbow is a key parts in a piping system for to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree or 90 degree.

45in BW reducer is belong to large dimension butt welded fittings,STD is a commonly used wall thickness for BW fittings.Other commonly used wall thicknesses for BW fittings are SCH 40,SCH 80.

ASTM A234 WPB Butt Welded Fittings are the best selling products in Shanghai Zhucheng Pipe Fittings Manufacturing Co Ltd from China.We can also supply customers forged pipe fittings,pipes and some related products.

he pipes cannot appreciate because of what the external arrangement of the pipe reducer seems but the flow of the pipe is changed by the internal width conical transition arrangement.

Steel pipe tee has three branches that can change fluid direction. It has T-shaped or Y-shaped, and include Equal Tee and Reducing Tee (Reducer Tee). Steel tee is widely used in pipe networks for convey liquids and gases.

10in equal elbow is used to transport flow in piping system.A234 WPB is the most used grade for carbon steel butt welded fittings.Elbows can be 90 degree and 45 degree.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

ASME B16.9 tee is a butt welded tee .ASME B16.9 is American Standard for BW fittings.Carbon steel fittings are always been chosen because of the great functions and affordable price.

Carbon Steel: Q235, 20#, 35#, 45#, 20G,ASTM A234 WPB/WPC
Low Temp Carbon Steel: Q345B, 16Mn, ASTM A420 WPL6
Pipeline Steel: ASTM A860 WPHY 42 / 46 / 56 / 60 / 65
Alloy Steel: ASTM A234 WP11 / WP12 / WP 5 / WP9 / WP91 / WP92,15CrMoG, 12Cr1MoVG, 12Cr5Mo, 1Cr5Mo, Cr9Mo, 10CrMo910, 12CrMo4-5
Stainless Steel: ASTM A403 WP304/304L/304H, 316/316L, 310S, 321, 317,347,904L
Duplex Stainless Steel: ASTM A815 S32205, S31803, 32750, 32760

What is a pipe Tee,its specification and importance.

ASTM A234WP5 6IN SCH40 90DEGREE ELBOW Fittings attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc,

Concentric reducer’s dimnesions and its usage and advantage

BW tees and elbows are both commonly used pipe fittings used to transport flow in piping system.Stainless steel pipe fittings re popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

A concentric reducer is used to join pipe sections or tube sections on the same axis. The concentric reducer is cone-shaped, and is used when there is a shift in diameter between pipes. For example, when a 1″ pipe transitions into a 3/4″ pipe and the top or bottom of the pipe doesn’t need to remain level.