Butt Welded Elbow Steel Pipe Fittings Packages

ASME B 16.9 tee is BW (butt welded) tee belong to butt welded fittings.These tees can bu equal type or reducing type.Normal tees can change the direction of the pipe system of 90 deg.And tees also have lateral tees to change the direction of 45 deg.

316L 90 deg elbow is a stainless steel pipe fitting which can used in chemical environment because of its an-ti corrosive function.SCH 10S is repersents to the wall thickness in butt welded fittings. Commonly used wall thickness is SCH 40 and SCH 80.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

3/4in BW tee is a normally used fitting in butt welded fittings.A403 WP321 is a grade for stainless steel.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

ASME B16.9 Stainless Steel Butt Weld Cross Fittings The function of a cross is similar to that of a tee by means of the exception of providing two 90 Deg outlets opposite each other.

Lap joint stub end usually used with lap joint flange.BW fittings are welding with the end of pipes.Butt welded fittings are popular because of the strong and permanent connections.

ASME B16.9 BW 90 elbow is pipe fitting manufactured according to American Standard.ASME B16.9 is American Standard of butt welded fittings.There is BW elbow in the picture,you could find the specification and dimensions below.

BW carbon tee are popular because carbon steel has great functions and cheap price.Coated pipe fittings also used in piping systems as the coating can enhance the functions for normal carbon steel.Galvanized coating is the most used coating,it can enhance the anti-resistance function.

Steel pipe elbow is a key part in a pressure piping system used to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe and thus the fluid direction turn to a certain direction of 45 degree or 90 degree. This change in fluid flow direction adds pressure losses to the system due to impact, friction and re-acceleration.

12in concentric reducer is a normal size pipe fitting that can used for many applications.SCH 80 is a commonly used wall thickness for BW fittings.There are two types of reducer:concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

Stainless elbow is a popular used type of elbow becase the stainless steel has excellent an-ti corrosive function.Shanghai Zhucheng is an excellent butt welded fittings factory who supplys high quality pipe fittings and flanges for years.

Butt welded fittings,can be abridged as BW fittings.Butt welded means the pipe fittings used welded connection to connect with pipes.BW fittings including Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End.Carbon steel always be the material of these fittings as carbon steel has great functions and affordable price.

ASME B16.9 BW reducer used the most used standard for butt welded fittings.arbon steel fittings are used in many applications because of its great excellent functions.BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

45 deg elbow is a type of elbows.These elbows have similar functions to 90 degree elbow,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.Shanghai Zhucheng is an excellent stainless steel pipe fittings supplier who supplys high quality pipe fittings and flanges for years.

Elbow is a commonly used connecting pipe fitting in plumbing installation, which is used for connecting pipe bends

BW cap is used to close the pipe system,the function is similar to plug.A234 WPB is a commonly used grade for carbon steel in American Standard.SCH 40S is represents a wall thickness of butt welded fittings.The commonly used wall thicknesses for BW fittings are SCH 40,SCH 80.

Concentric reducers are beneficial to use where different ratings and to wear protection is required in conveying between flanges or pipes. nd the pipe is connected through conical transition section on the same axis.

Long radius elbow refers to the pipe outer diameter with radius of curvature equal to 1.5 times, i.e R = 1.5D. Most elbows are available in short radius or long radius variants. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.

Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is the reducing tee can reduce the flow in the piping system.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180° or 90° angle, though 45° elbows are also made. The ends may be machined for butt welding (SW) or socketed welding(SW) etc.

LR 90 degree steel pipe elbow are installed between different lengths pipe or tubing, It helps to change direction at 90 degree.

Steel bend is almost same as pipe elbow. It’s radius is bigger and extensive used in oil and gas, engineering and construction industry.

It is used to handle any high or low weight fluid flow through the tee.Reducing tee is a kind of pipe fitting whose branch size is smaller than the size of pipeline parts. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories. Such fittings are important because they meet two needs, that is, to connect or separate liquid streams. They are widely used in positive and vacuum applications.

45 deg elbow can be butt welded elbow and forged elbow.Forged elbows are including SW (socket weld) elbow and THD (threaded) elbow.Stainless steel pipe fittings are popuar because stainless steel has excellent corrosion resistance,stainless steel has using age over 50 years,so the material is more expensive than other materials.

A234 WPB BW tee is a commonly used pipe fitting to transport flow in piping system.There are two tpyes of tees:Equal Tee and Reducing Tee.SCH 80 is a commonly used wall thickness for butt welded fittings,the other commonly used wall thickness is SCH 40.

What is Galvanizing?

Galvanizing, or galvanization, is a manufacturing process where a coating of zinc is applied to steel or iron to offer protection and prevent rusting. There are several galvanizing processes available, but the most commonly offered and used method is called hot-dip galvanizing.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Concentric reducer’s dimnesions and its usage and advantage

It can be axially shifted and externally reconfigured to offer more efficient reducer connection. Concentric reducers facilitate the delivery of mud and abrasive fluids and are suitable for corrosive operations and where different ratings and wear protection are required between flanges.

BW 90 degree elbow is formed by hot forming and connects steel pipes or other pipe fittings through butt welding process. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.