ASME/ANSI B16.9 buttweld 45/90 deg elbows ASTM A234

Whatis the difference between concentric and eccentric reducers?

There are two types of tees:Equal Tee and Reducing Tee.Both types of tees can branches the pipes but reducing tees can also reduce the flow.Schedule 40 is a commonly used wall thickness in butt welded fittings.

45° Pipe Elbow is also known as “45 bends or 45 ells”. The 45° pipe elbow is used to connect tubes at a 45° pipe angle. As the name suggests, this is a pipe fitting device which is bent in such a way to produce 45° change in the direction of flow of the fluid/gas in the pipe.

Lap joint stub end usually used with lap joint flange.BW fittings are welding with the end of pipes.Butt welded fittings are popular because of the strong and permanent connections.

Equal butt weld elbow is used to change the direction of the flow in piping system.SCH 80 is a commonly used wall thickness for butt welded fittings,the other commonly used wall thickness is SCH 40.

BW 90 elbow is the most used degree,there is also 45 deg elbow to choose.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.ASME B16.9 is American Standard of butt welded fittings.

ASME B16.9 tee is a butt welded tee .ASME B16.9 is American Standard for BW fittings.Carbon steel fittings are always been chosen because of the great functions and affordable price.

BW carbon tee are popular because carbon steel has great functions and cheap price.Coated pipe fittings also used in piping systems as the coating can enhance the functions for normal carbon steel.Galvanized coating is the most used coating,it can enhance the anti-resistance function.

Elbow is a commonly used connecting pipe fitting in plumbing installation, which is used for connecting pipe bends

45in BW reducer is belong to large dimension butt welded fittings,STD is a commonly used wall thickness for BW fittings.Other commonly used wall thicknesses for BW fittings are SCH 40,SCH 80.

SS 304/304L elbow is stainless steel pipe fitting.304/604L is the most commonly used grade of stainless steel in American Standard.Elbows can made as 90 deg and 45 deg.Among these,90 degree elbows can be LR and SR while 45 degree elbows only have LR type.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

BW elbow is popular because of the strong and permanent connection.The anti corrosion function of carbon steel and alloy steel is not as good as stainless steel,so coated pipes and fittings have paint or oil to protect the fittings during sea transportion.

Elows’ standard and its wall thickness

BW (butt welded) reducer have two types:Eccentric Reducer and Cocentric Reducer.Reducer only has welded connection.However,swage nipple which belong to forged fittings has same function to reducer.

90° Steel Pipe Elbow is the most commonly used elbow type in pipe system with the function to change the direction of fluid in 90 degree. It connects pipes with same or different diameter.

Reducing tee a one of the type of tees,the other type is equal tee.these two types tees have similar functions,but the reducing tees can reduce the flow.Shanghai Zhucheng is an excellent Pipe fittings manufacturer who supplys high quality fittings for many years.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Pipe crossing is used where four pipes intersect. The cross pipe may have one inlet and three outlets, or three inlets and one outlet. The diameter of the outlet and inlet can be the same or different.

BW ELBOW are installed between different lengths pipe or tubing. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

Steel pipe elbows have seamless and welded version, normally in 90 degree, 45 degree & 180 degree. Material are carbon steel, alloy steel & stainless steel. BW 90 degree elbow is formed by hot forming and connects steel pipes or other pipe fittings through butt welding process

90 deg 4D bend is belongs to butt welded fittings.4D means the radius of the bend is 4 times long the dimension of the pipe bend.API A53B is a great of carbon steel materical for pipes and bends in American Standard.

Steel pipe tee is a pipe fitting used to tansport the flow in the piping system.Carbon steel fittings are used in many applications becasue of its great excellent functions.

Butt welded tee can be equal type and reducing type.Both types can change the direction of the piping system in 90 deg.In addition,the reducing tees can reduce the flow of the fluids or gas.Shanghai Zhucheng is an excellent pipe fittings manufacturer from China who supply high quality fittings for years.

Difference between a pipe elbow and a pipe bend is as follows:

ASTM A234WP5 6IN SCH40 90DEGREE ELBOW Fittings attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc,

Steel pipe elbow is an important parts in plumbing pipeline systems and used to change the fluid directions. It ranges in different types as per body material there are stainless steel elbow, carbon steel elbow, and alloy steel;