BW 90 Degree Elbow Stainless Pipe Fittings

ASTM A234 WPB pipe fittings are have a large size:1/2″-80″.32 in carbon steel butt welded elbow is a common used size in large size of BW elbows.

BW 180 deg elbow is used to change the direction of pipe system in 180 degree.There are also 90 deg elbow and 45 deg elbow to meet different demands.Carbon and alloy steel are always called “black steel” as the surfer of these steels are black.

BW 90 degree elbow is usually be carbon steel for large dimensions.Butt welded 90 deg elbow also can be alloy steel and stainless steel.Steel pipe fittings are used in piping systems in many industries.

A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Elbow connectors can link pipes to avoid water leakage and air leakage between pipes.

Elbows and seamless elbows are often used in the bending parts of pipes to change the direction of pipes Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

Carbon steel tee is a commonly used tpye of tees.This is butt welded (BW) carbon steel tee in the picture.it can welded with pipes to achieve permanent connection.Equal tee only can change the direction of the pipes while reducing tee can also reduce the flow of the fluids or gas.

Steel bend is almost same as pipe elbow. It’s radius is bigger and extensive used in oil and gas, engineering and construction industry.

ASME B 16.9 tee is BW (butt welded) tee belong to butt welded fittings.These tees can bu equal type or reducing type.Normal tees can change the direction of the pipe system of 90 deg.And tees also have lateral tees to change the direction of 45 deg.

90 degree elbow, also called “90 bends or 90 elbows”, are manufactured as SR (Short Radius) elbows and LR (Long Radius) elbows.

Long radius elbow refers to the pipe outer diameter with radius of curvature equal to 1.5 times, i.e R = 1.5D.
Short radius elbow means that its radius of curvature is equal to the outer diameter of the tube, i.e R = 1.0D

Large Diameter Concentric Reducer is belong to butt welded fittings because BW fittings size range is 1/2″-80″ while the forged fittings only have 1/8″-4″.ASTM A234 WPB is represents to carbon steel pipe fittings in American Standard.

It is used to handle any high or low weight fluid flow through the tee.Reducing tee is a kind of pipe fitting whose branch size is smaller than the size of pipeline parts. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories. Such fittings are important because they meet two needs, that is, to connect or separate liquid streams. They are widely used in positive and vacuum applications.

The function of a 45 degree elbow is the same as a 90 degree elbow, but the measurement of dimensions is different to that of the 90 degree elbow.Compared to 90 degree elbow, 45 degree elbow produces less friction, and with the lower pressure.

In the layout of the pipeline system, long radius elbows should generally be used for connection, and short radius elbows are usually used in places where the installation position of the pipeline system is compact or to reduce costs

Concentric reducer consists of the symmetrical and conical shaped fittings that enlarge or reduce the diameter equally about the center line.

Steel pipe elbow is an important parts in plumbing pipeline systems and used to change the fluid directions. It ranges in different types as per body material there are stainless steel elbow, carbon steel elbow, and alloy steel;

BW (butt welded) reducer have two types:Eccentric Reducer and Cocentric Reducer.Reducer only has welded connection.However,swage nipple which belong to forged fittings has same function to reducer.

Stainless 90 deg elbow has better anti-corrosive function than other material elbows.90 degree elbow can be two types: LR (long radius) and SR (short radius).Elbows can also be 45 degree,but 45 deg elbow only has LR type.

Steel pipe cap is usually welded onto end of pipe that blcok off the piping line system, it has same funtion with plug and blind flange. It is available in material of carbon steel, stainless steel and alloy steel.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

45 deg elbow is a type of elbows,there are also 90 deg elbows and 180 deg elbows.These elbows have similar functions,the main difference is the degree.Elbows can be BW,SW and THD to chosen for different applications.Shanghai Zhucheng is a quality pipe fittings supplier from China.

There are two types of tees:Equal Tee and Reducing Tee.Both types of tees can branches the pipes but reducing tees can also reduce the flow.Schedule 40 is a commonly used wall thickness in butt welded fittings.

304/316L BW tees are the most used tees in stainless steel tees.304/316L are the most used grades in American Standard.Tees can be Equal Tees and Reducing Tees.You could find the summary “Equal VS Reducing Tee” in the content below.Stainless steel pipe fittings are populat because of the excellent functions of corrosion resistance.

he pipes cannot appreciate because of what the external arrangement of the pipe reducer seems but the flow of the pipe is changed by the internal width conical transition arrangement.

BW ELBOW are installed between different lengths pipe or tubing. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

BW 90 elbow is the most used degree,there is also 45 deg elbow to choose.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.ASME B16.9 is American Standard of butt welded fittings.

The reducing tee has two outlets cut at 90 degrees with the main pipe, and the size of the branch pipe is smaller than the port of the pipeline. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories

Stainless 316L tee is a stainless steel pipe fitting used to change the direction of the fluids or gas and branch the pipe system.Tees can be equal tees and reducing tees for different usages.Stainless steel fittings are be chosen by the long using years.Beacuse of the high corrosion resistance,stainless steel can be used over 50 years.