Home » Forged Steel Flanges » Carbon Steel A105 Threaded Nipple Dimensions

Carbon Steel A105 Threaded Nipple Dimensions

ASTM A105 threaded fittings is commonly used carbon steel grade which is used to manufacture forge piping components such as forged fittings and flange of small diameter piping, generally for piping whose nominal diameter is NPS 2 or smaller.

Rated 4.6/5 based on 420 customer reviews
Share:
Content

Description of  Threaded Nipple

 

Threaded nipple is a short piece length of pipe or tube. Its size is specified according to the length of this section of pipe and the diameter. It can be with threaded or flat ends. And both ends can be the same or different.

There are two shape : threaded one end (TOE) and threaded both end ( TBE).

Specifically, TOE means threaded at one end when translated. Thus, we can say that a nipple TOE is a nipple that has one threaded end.

In this case, we have the acronym TBE for “threaded both ends” which means threaded at both ends. In other words, this is the most typical type of nipple as described above for connecting two parts or fittings with female threading.

 

Carbon Steel A105 Threaded Nipple Drawing and Dimensions

 

THD one end and both ends nipples ASME B16.11 SCH10-SCH160

 

Material

 

ASTM A105 threaded fittings is commonly used carbon steel grade which is used to manufacture forge piping components such as forged fittings and flange of small diameter piping, generally for piping whose nominal diameter is NPS 2 or smaller.

 

Carbon Steel A105 Threaded Nipple Chemical Composition

 

Gr. C Si Mn P S Mo Ni Cr Cu V
A105 Forged Fittings 0.35 0.10–0.35 0.60–1.05 0.035 0.040 0.12 0.40 0.30 0.40 0.08

 

Carbon Steel A105 Threaded Nipple Mechanical Characteristics

 

Gr. Yield Strength, Min (MPa) Tensile Strength, Min (MPa) Elongation, min, %
A105 Fitting   250 485 30
Inquiry


    More Threaded Pipe Fitings