ASME B16.9 Lateral Tee Welded Pipe Fittings

BW Elbow Fittings can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc,

BW (butt welded）reducer has two types:concentric reducer and eccentric reducer.As it is butt welded fitting,its size can be 1/2″ – 80″,so butt welded fittings can be used in many applications.Stainless steel fittings are more expensive but the functions are also better than others.

DN1200 BW elbow is belong to large dimension fittings,these fittings always be butt welded fittings because of the large size.Butt welded fittings used welded type to connect with the pipes to achieve strong and permanent connection.

How to use a BW tee in a pipesystem,what about its specification and advantages.

It can be axially shifted and externally reconfigured to offer more efficient reducer connection. Concentric reducers facilitate the delivery of mud and abrasive fluids and are suitable for corrosive operations and where different ratings and wear protection are required between flanges.

The function of a 45 degree elbow is the same as a 90 degree elbow, but the measurement of dimensions is different to that of the 90 degree elbow.Compared to 90 degree elbow, 45 degree elbow produces less friction, and with the lower pressure.

Steel bend is almost same as pipe elbow. It’s radius is bigger and extensive used in oil and gas, engineering and construction industry.

BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.There are the applications for eccentric reducer.

Carbon steel butt welded 90° elbows are belong to ASTM A234 WPB pipe fittingsBW 90 deg elbows could be made in two types:LR (Long Radius) and SR (Short Radius).The angle of pipe elbows are 45deg and 90 deg.Only 90 deg elbows have LR.

The pipes cannot appreciate because of what the external arrangement of the pipe reducer seems but the flow of the pipe is changed by the internal width conical transition arrangement. It can be axially shifted and externally reconfigured to offer more efficient reducer connection. Concentric reducers facilitate the delivery of mud and abrasive fluids and are suitable for corrosive operations and where different ratings and wear protection are required between flanges.

A 90 degree bend is a pipe fitting that changes the direction of the pipe by 90 degrees, and its shape is usually a curved structure that is a quarter round.

45 deg elbow has three types:BW (butt welded) elbow,SW (socket welded) elbow and THD (threaded) elbow.Elbows can also be 90 degree and 180 degree to meet different demands.Shanghai Zhucheng is an experienced pipe fittings manufacturer who supplys high quality pipe fittings and flanges for many years.

Steel pipe bend is belong to butt welded fittings,bends have some similar usages as elbows.However,bends can be customized by clients to satisfy different demands.

If the radius is the same as pipe diameter (Center-to-Face dimension of 1.0 X diameter ), it called Short Radius Elbow (SR elbow) used normally for low pressure and low speed pipelines or in tight areas where clearance is the main issue. If the radius is larger than pipe diameter (Center-to-Face dimension of 1.5 X diameter) then we call it a Long Radius Elbow (LR Elbow) used for high pressure and high flow rate pipelines.

What is a 90 degree elbos and its classification.

Carbon steel butt welding 90 degree elbow is a connector specially designed for use in piping systems. Its main function is to create a 90 degree turn in the pipe so that the fluid can flow along a predetermined path.

Butt weld fittings include elbows, tees, cross, caps and reduces. These fittings are the most common type of welded pipe fitting and are specified by nominal pipe size and pipe schedule. Buttweld fittings are manufacture by seamless or welded pipe and are formed to get the shape of elbows, tees and cross etc.

A234 WPB elbow is a pipe fitting that changes the direction of carbon steel pipes. It is usually made of carbon steel and uses a bending process to process the straight pipe section into a curved pipe section with a certain angle.

BW Reducing tee is one type of pipe tees,the other type is equal tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.Carbon steel fittings are used in many applications because of its great excellent functions.

Classify of elbows and how to sperate it into SR and LR Elbows

Butt welded lateral tee is a special type of BW tees.It is different from the normal tees as the lateral tee can change the direction of the pipe system in 45 degree.Carbon steel fittings are the most used fittings as carbon steel material has great functions and affordable price.

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

BW elbow is popular because of the strong and permanent connection.The anti corrosion function of carbon steel and alloy steel is not as good as stainless steel,so coated pipes and fittings have paint or oil to protect the fittings during sea transportion.

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

There are two types of tees:Equal Tee and Reducing Tee.Both types of tees can branches the pipes but reducing tees can also reduce the flow.Schedule 40 is a commonly used wall thickness in butt welded fittings.

Concentric reducer’s dimnesions and its usage and advantage