Forged Steel Pipe Flanges Carbon Steel Slip On Flange Dimension

It is used to insert the pipe into the inner hole of flange, as the flange inner diameter is little bigger than the pipe’s outer diameter, pipe and flange could be connected by lap welding at the top and bottom of the flange. The slip-on flange is a simple and excellent alternative to a weld neck as it does not have a weld bevel, and therefore allows the pipe to be adjusted in length relative to its position of the flange.

Slip on flange is also called SO flange.This flange can slip onto the pipes and welded with the pipes.Shanghai Zhucheng is a forged flanges supplier who supply high quality flanges for years.

The slip-on flange is a simple and excellent alternative to a weld neck as it does not have a weld bevel, and therefore allows the pipe to be adjusted in length relative to its position of the flange. The bore of the slip on will give ample amount of space for the matching pipe.

Stainless steel flange, also called SS flange, it means the material of flange is stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500.

What is a WN Flange?and what about its specification

There are varies advantages of stainless steel flange:
Resistant to corrosion and staining
Low maintenance
Bright familiar luster
Steel Strength

The purpose of these is to block off a section of pipe or a nozzle on a vessel that is not used. (A nozzle is typically a pipe coming out of a vessel and is usually flanged so it can be connected to valves or piping). Many times a nozzle will be blanked off with a blind flange for pressure tests in a plant, or simply because the customer does not need all the nozzles that were supplied on the tank.

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

Threaded nipple is a short piece length of pipe or tube. Its size is specified according to the length of this section of pipe and the diameter. It can be with threaded or flat ends. And both ends can be the same or different.
There are two shape : threaded one end (TOE) and threaded both end ( TBE).

CL 600 slip on flanges are commonly used type of flanges.ASTM A182 F316L is a popular grade for stainless steel.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel flanges can used over 50 years.

Material Grade: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317,347,904L， 1.4404, 1.4437.

A182 F304 forged flanges are stainless steeel flanges,ASME B16.5 SW flanges are socket weld flanges following American Standard specifications.

What is a weld neck flange and its specification?

Socket weld flange can socket with the end of pipe,and welding on the pipe.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

A swage nipple is something similar to that of a reducer but it is used to join the butt welded pipe with a socket welded or screwed pipe.Like the reducer,swage nipple is also available with two variations:concentric swage nipple and eccentric swage nipple.The swage nipple generally adopts the MSS SP-95 or the BS3799 Standard.

Socket weld (SW) flange is a type of forged flanges,these flanges can socket and wedled with pipes,you could find the flanges specifications in the content below.Stainless steel flanges are popular because the stainless steel has great corrosion resistance so that these flanges can used in some corrosive environments.

These Stainless Steel A182 Threaded Union are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.

What is a Socket Weld Flange,what abut its specification and advantages

Slip ons in higher pressure classes are often made with the height of a lap joint for a better connection. If the hub height is not a concern and a lap joint is not readily available, customers will sometimes opt for a slip on made to a lap joint style with a machined hub.

ASME B16. 5 is limited to flanges and flanged fittings made from cast or forged materials, and blind flanges and certain reducing flanges made from cast, forged, or plate materials. Also included in this Standard are requirements and recommendations regarding flange bolting, flange gaskets, and flange joints.

Face Type of a WELD NECK flange

These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

Slip on flange, also called SO flange. It’s a kind of flange slides over the pipe with internal design is slightly larger than the pipe. Since the inner diameter of the flange is slightly larger than the outer diameter of the pipe, the SO flange can be directly connected to equipment or pipe by fillet weld at the top and bottom of the flange. It is used to insert the pipe into the inner hole of the flange.

Steel Flange Fittings connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

The specification of ASTM A182 Forged Pipe Fittings includes forged fittings, stainless steel, rolled alloy, forged alloy, pipe flanges as well as high-temperature service. Later then forgings and hot working, it would be cooled down to a certain temperature before heat treatment.
The Alloy Steel A182 Threaded Elbow material grade contains ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22.

WN flange is a commonly used type of flanges,ASMT A150 forged flange is carbon steel flange according to American Standard.Flanges have many types:WN,SO,SW,THD,LAPJ,BL.