300 # bakin karfe mai launin shuɗi 2 inch wald wuƙa

Nono na karfe shine ɗan gajeren yanki na bututu ko bututu. An ƙayyade girman sa bisa ga tsawon wannan sashin bututu da diamita. Zai iya zama tare da zaren da ke rufe ko lebur ƙarshen. Kuma duka biyun na iya zama iri ɗaya ko daban.

/^/^Stainless steel A182/^/^/^/^/^/^ /^/^Inspection services/^/^-1) check the steel pipe & fittings of outer diameter, thickness, quantity, material, etc./^/^/^/^-2)record it in words and ph...

600lb slanges zan iya soket tare da flanges sannan a welded tare da bututu.47 a & b sune daidaitattun manyan dassar diamita.

Astm A182f316l High Stress Weld Wanding, yana da yankin da aka karba (wannan kafada) a cikin fashin wuta, wannan kafada) a matsayin jagora don saita flange.

Highter Weld Wanna War Flani in wn

WLELY FASHI (WN), Slight-akan Flange (So), Fleld Wallning (BL), Flel Sld Fland (BL), Flel Wlnen (ST

l. Babban diamita lebur mai welding flange yana da ƙarancin dacewa-matsa lamba idan aka kwatanta da seld weld takwarsa. Tsarin zoben zobe ya dace da lokacin karamar matsin lamba. An san nau'in Weld na Butt ɗin Flah a matsayin Weld Warnge. Ya fi dacewa da bikin zazzabi da matsin lamba kamar yadda aka ayyana a cikin Asme B16.47 Code. Babban flanger na diamita anyi amfani dashi sosai kuma ana amfani dashi a cikin masana'antar jiyya, masana'antar wutar iska, masana'antar ta sinadarai, da masana'antar kayan masarufi.

Astm A182F316L High Stread Soket Wald Walning - Shanghai Zuchenen Fiton

Sketer Weld Flage girma - Class 150 zuwa aji 1500

Wadannan bututun bututun suna haɗe ne ta hanyar shigar da bututun a ƙarshen sock da kuma amfani da fillet a kusa da saman. Wannan yana ba da damar sassauci sosai kuma mafi kyawun kwararar ruwa ko gas a cikin bututu. Haɗin tare da bututun ana yi tare da sellet weld, a waje na flangar. Amma kafin waldi, sarari dole ne a ƙirƙira tsakanin flange ko dacewa da bututu.

Bakin karfe macen karfe yana da aikin anti-corrove fiye da sauran kayan wasan kwaikwayo na spectam MobeShe Mobe ne, ff da aka yi amfani da shi), RTJ (Haɗin fuska), yana dogaro da nau'in flanges.

Bakin karfe fiker, kuma ake kira flangen ss, wannan yana nufin kayan flangen ne bakin karfe. Abubuwan da aka gama gama gari da maki sune ASM ASM A102 na F3016 \ / l, 300, 600 da sauransu da 2500.

Dalilin waɗannan shine a toshe sashin bututu ko bututun ƙarfe a kan jirgin ruwa da ba'a yi amfani da shi ba. (Bakin bututu ne yawanci bututu ya fito daga jirgin ruwa kuma galibi ana haskakawa saboda haka ana iya haɗa shi da bawuloli ko bututun). Sau da yawa sau da yawa za a bashe tare da flangarho makaho a cikin shuka a cikin shuka, ko kuma kawai saboda abokin ciniki ba ya bukatar duk nozzles da aka kawo a kan tanki.

Astm A182f316l High Stress Weld Wanding, yana da yankin da aka karba (wannan kafada) a cikin fashin wuta, wannan kafada) a matsayin jagora don saita flange. Fasaha Welding flance da farko da aka tsara don matsin lamba kan ƙananan matsin lamba na kantin takardu.

Astm A182 F304 \ / 304L \ / 304h, 316 \ / 34,3l, 310s, 1.4404, 1.4437, 1.4437, 1.4437.

Wannan yana ba da damar sassauci sosai kuma mafi kyawun kwararar ruwa ko gas a cikin bututu. Haɗin tare da bututun ana yi tare da sellet weld, a waje na flangar. Amma kafin waldi, sarari dole ne a ƙirƙira tsakanin flange ko dacewa da bututu.

An sanya flangarfin lap a cikin bututun da zai ƙare ta hanyar kunna wuta, zobe na karfe don sanya flange a ƙarshen bututu. Flange na iya motsawa a ƙarshen bututu. Aikin flange shine don danna su da ƙarfi. Tunda ana katange shi ta hanyar flow, flani ya hadu da flanid ba ya karantawa da matsakaici.

Slipping a cikin azuzuwan matsin lamba mafi girma ana yin su sau da yawa tare da tsayin haɗin gwiwa don ingantaccen haɗin. Idan Hub Height ba damuwa da kuma cinikin Lap ba a samun sau da yawa ba, wani lokacin abokan cinikin zai fice don zamewa a kan sanya hannu na haɗin gwiwa tare da hanyar haɗin gwiwa tare da injin haɗin gwiwa.

Mafi yawan zinare

Asme B16.5, Asme B16.47 jerin a \ / B, api 692-1 api 60, Din 2577, Din 2577, Din 2657, Din 2656, Din2573 Din2573 Din2573
Class 150 F316 Slip akan flani shine kashi ɗaya na haɗin bututun guda ɗaya, galibi da aka yi da kayan bakin karfe, ta hanyar zamewa a kan da bututu ko wasu flanges suna da alaƙa. Slip akan flange an haɗa da flange plate, bolt rami rami da kuma rufe.

Thearfin zamewa a kan zai ba da isasshen adadin sarari don bututun da suka dace. Wannan yana ba da damar isa ga Welder da maƙiyayi don yin haɗin ra'ayi don yin fannonin da ba a saba da harshen wuta ba.

An yi filayen haɗin gwiwa na A105 ta hanyar amfani da flanges, zobba na karfe, da dai sauransu don sa flanges a kan bututun ya ƙare a kan bututun ya ƙare. Aikin flange shine don danna su da ƙarfi. Domin an toshe su da flages, flanges na haɗin gwiwa ba sa tuntuɓar matsakaici.

Slipping akan bututun bututun mai asme B16.5 Fittings

Sild-akan flani ne mai sauki kuma yana da kyau ga wuyen wuyanta kamar yadda bashi da weld bevus, kuma saboda haka saboda haka yana ba da bututun da za a daidaita da matsayin sa. Thearfin zamewa a kan zai ba da isasshen adadin sarari don bututun da suka dace.

150lb Thered Flantes iri ɗaya ne na flanges iri ɗaya ne na flanges: CL150, CL3Rosel, CL600, CL100, CL1500, CL1500, CL1500, CL1500, CL1500, CL1500, CL1500.

A234 WPB Makafi flange wani nau'in flane ya yi amfani da shi sosai a tsarin bututun mai. A234 shine daidaitaccen adadin al'ummar Amurka don gwaji da kayan (Astm), da WPB suna nuna cewa wannan kayan shine bututun ƙarfe na carbon na matsakaiciya da ƙananan yanayin sanyi.

Babban diamita lebur mai welding flange yana da ƙarancin dacewa-matsa lamba idan aka kwatanta da seld weld takwarsa. Tsarin zoben zobe ya dace da lokacin karamar matsin lamba. An san nau'in Weld na Butt ɗin Flah a matsayin Weld Warnge. Ya fi dacewa da bikin zazzabi da matsin lamba kamar yadda aka ayyana a cikin Asme B16.47 Code.