Stainless Steel A403 Butt Weld 45 Degree Elbow Dimensions

BW elbow types have BW (butt welded),SW (socket weld),THD (threaded).The butt welded elbow is the most used type.Elbows have two shapes:Equal and Reducing.Shanghai Zhucheng is a pipe fittings manufacturer who can supply 45 deg,90 deg and 180 deg elbows.

Steel tee is a T-shaped pipe fitting with three branch pipes. It is used to divide pipes to adjust flow and change direction.

Carbon steel elbow dimensions are different depend on the type of the elbow.BW elbows can be 1/2″-80″;SW elbow and THD elbow can be 1/8″-4″.Elbows can be made from carbon steel,alloy steel and stainless steel.Shanghai Zhucheng is an experienced pipe fittings manufacturer for many years.

45 degree elbow produces less friction, and with the lower pressure. 45 degree elbow is widely used in chemical industry, food, water supply facilities, electronic industry, chemical pipeline, horticulture, agricultural production, solar equipment pipeline, air conditioning pipeline and other fields.

90 degree elbow’s usage and its specification

A equal tee’s usage,dimension and features.

90 deg short radius elbow is a special type only for BW 90 degree elbows.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

The long radius is used most commonly, and it is also the default radius. When it is the place with the high pressure or the high flow rate, the long radius elbow is usually used. If the resistance requirements of the solid transmission pipeline are strict, the larger radius elbows will be used.

Carbon steel elbow is a weldable & threaded pipe fitting that allows for change of flow direction, we manufactured them as standard of ASME B16.9 and B16.11. ASTM A234 WPB Elbow is the common used in the oil and gas industires.

Carbon steel tee is a commonly used tpye of tees.This is butt welded (BW) carbon steel tee in the picture.it can welded with pipes to achieve permanent connection.Equal tee only can change the direction of the pipes while reducing tee can also reduce the flow of the fluids or gas.

Steel pipe cap is usually welded onto end of pipe that blcok off the piping line system, it has same funtion with plug and blind flange. It is available in material of carbon steel, stainless steel and alloy steel.

What is a CONCENTRIC REDUCER and what about its specification and advantages.

Stainless steel tee has two types:Equal Tee and Redcuing Tee.These two types of tees have same functions,the only difference can reduce the flow in the piping system.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

45 deg elbow is a type of elbows,the other most used type is 90 degree elbow.These elbows have same functions,the only difference is the 45 degree elbow can changes the direction of pipes in 45 deg while 90 degree elbow can changes in 90 deg.

Butt weld fittings are manufacture by seamless or welded pipe. For pipe fittings manufacturers, the forming process of welded pipe and seamless pipe is basically same. Butt welded fittings can be divided into carbon steel butt welded fittings and stainless-steel butt-welded fittings

Steel Reducing Tee: The branch diameter is smaller than the main line diameter. Tee reducer is usually described as NPS diameters in 4”x 4”x 3”, 4”is the main line pipe diameter, and 3”is the reducing branch

Steel pipe tee has three types: BW (butt welded),SW (socket welded),THD (threaded).The branches can be equal and reducing.Shanghai Zhucheng is a superior pipe fittings supplier who provide high quality pipe fittings and forged flanges in years.

Pipe crossing is used where four pipes intersect. The cross pipe may have one inlet and three outlets, or three inlets and one outlet. The diameter of the outlet and inlet can be the same or different.

In the layout of the pipeline system, long radius elbows should generally be used for connection, and short radius elbows are usually used in places where the installation position of the pipeline system is compact or to reduce costs

Concentric reducer’s dimnesions and its usage and advantage

This kind of elbow is classified by angle, and 45 degree elbow and 180 elbow is also very popular. And steel pipe elbow is also available in 60 degree, 30 degree and other special angle according to practical needs.

Elbows are split into two groups which define the distance over which the flowing fluid change direction; the center line of one end to the opposite face. This is known as the “Center to Face” distance and is equivalent to the radius through which the elbow is bent.

Carbon steel elbows are curved connecting pieces that join straight lengths of pipe, commonly at a 90° or 45° angle, allowing obstructions to be avoided in plumbing, ventilation, welding, and automotive applications.

3/4in BW tee is a normally used fitting in butt welded fittings.A403 WP321 is a grade for stainless steel.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

1/2 in bend is small diameter fitting in pipe fittings.The degree of bends can be customized by clients.Carbon steel pipe fitting can be used to satisfy many applications because of the great functions and affordable price.

A pipe reducer is the type of pipe fitting which helps to join two pipes with different diameters. There are various material for The pipe reducers as per the demands of industries and also available in many dimensions.