Stainless Steel A403 WP316/316L 90 Degree LR Butt Weld Elbow

Concentric reducers facilitate the delivery of mud and abrasive fluids and are suitable for corrosive operations and where different ratings and wear protection are required between flanges.

ASME B16.9 tee is a butt welded tee .ASME B16.9 is American Standard for BW fittings.Carbon steel fittings are always been chosen because of the great functions and affordable price.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

45 deg elbow can change the direction of fluids or gas in 45 degree.There is also has 90 deg elbow to be chosen.45 degree elbow has many diffences with 90 degree elbow.All types of elbows can be Equal Tee and Reducing Tee to satisfy different demands.

3/4in BW tee is a normally used fitting in butt welded fittings.A403 WP321 is a grade for stainless steel.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

BW tee is a commonly used fittings in BW fittings.Tees can also be threaded (THD) and socket welded (SW) tees to used in many different applications.Shanghai Zhuangcheng is an excellent pipe fittings manufacturer who can supply high quality pipe fittings in China.

Carbon steel tee is the most used tees because of the great material.Shanghai Zhucheng is an excellent pipe fittings supplier who supplys high quality pipe fittings and flanges for years.Carbon steel fittings are used in many applications because of its great excellent functions.

What is a STEEL PIPE TE and what about its specification and advantages.

The reducing tee has two outlets cut at 90 degrees with the main pipe, and the size of the branch pipe is smaller than the port of the pipeline. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories

Buttwelding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS

Carbon steel tee is a commonly used tpye of tees.This is butt welded (BW) carbon steel tee in the picture.it can welded with pipes to achieve permanent connection.Equal tee only can change the direction of the pipes while reducing tee can also reduce the flow of the fluids or gas.

90 deg 4D bend is belongs to butt welded fittings.4D means the radius of the bend is 4 times long the dimension of the pipe bend.API A53B is a great of carbon steel materical for pipes and bends in American Standard.

ASTM A403 Stainless Steel Butt Weld 45 Degree Elbow refers to the material of forged and rolled austenitic stainless fittings for pressure pipes. Common grades are WP304/L, WP316/L. They can be used into many fields as engineering industry, energy conversion plants etc. ASTM A403 WP304, WP316 Elbow are buttweld fittings made for austenitic stainless steel applications with forged material.

4in BW elbow is a small dimension elbow,4in is a normal size of elbows so that this type can be used in many piping systems.Carbon and alloy steel pipe fittings are usually be chosen as the excellent functions and reasonable price.

Pipe crossing is used where four pipes intersect. The cross pipe may have one inlet and three outlets, or three inlets and one outlet. The diameter of the outlet and inlet can be the same or different.

Butt welded cross is pipe fitting used to transport the flow in piping systems.BW cross can connect four pipes vertically with welded connection.Cross can be two types:Equal and Reducing.These crosses have similar functions,but reducing tees can reduce the flow while equal tees can not.

Steel pipe elbow is an important parts in plumbing pipeline systems and used to change the fluid directions. It ranges in different types as per body material there are stainless steel elbow, carbon steel elbow, and alloy steel;

A234 WPB Carbon Steel Buttweld 90 Deg Elbow’s usage

There are two types of tees:Equal Tee and Reducing Tee.Both types of tees can branches the pipes but reducing tees can also reduce the flow.Schedule 40 is a commonly used wall thickness in butt welded fittings.

90 deg long radius elbow is a commonly used type in elbows.There are aslo 90 degree short radius elbow and 45 degree elbow.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Concentric reducer’s dimnesions and its usage and advantage

Steel pipe tee has two types:Equal Tee and Reducing Tee.Common tees have 90 dergee between the main pipe and the branch.There also has lateral tee which has 45 degree between the main pipe and the branch.

Elbow is a commonly used connecting pipe fitting in plumbing installation, which is used for connecting pipe bends

ASTM A234 specification has many grades, such as WPB, WPC, WP5, WP9 WP11, WP12, WP22, WP91 and so on.
In these standard Grade WPB is the most common material used for medium and high temperature pipelines. W means weldable, P means pressure, B is grade b, refer to the minimum yield strength.

90 deg elbow is the most chosen degree in elbows.There are also 45 deg and 180 deg elbows.Elbows can be Equal Elbow and Reducing Elbow to satisfy different demands.ASTM A234 WPB is a material grade in American Standard repersents carbon steel butt welded fittings.

45 degree elbow is widely used in chemical industry, food, water supply facilities, electronic industry, chemical pipeline, horticulture, agricultural production, solar equipment pipeline, air conditioning pipeline and other fields.

Concentric reducer is used to join pipe sections or tube sections on the same axis. It is cone-shaped, and is used when there is a shift in diameter between pipes.