The radius of both the 45 degree and 90 Degree long and short elbow is the same however, the center to face dimension is not equivalent due to the smaller degree of bend.
The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.
Butt weld fittings would also be referred to as welded pipe fittings. When these would be used in stainless steel and carbon steel, they would be able to offer certain advantages as compared to socket weld and threaded fittings. Whereas socket weld would only be available up to a specific size, you would find butt weld fittings to be available in sizes starting 1/2 inch to 72 inch.
A concentric reducer is used to join pipe sections or tube sections on the same axis. The concentric reducer is cone-shaped, and is used when there is a shift in diameter between pipes. For example, when a 1″ pipe transitions into a 3/4″ pipe and the top or bottom of the pipe doesn’t need to remain level.
Concentric reducer’s dimnesions and its usage and advantage
How to use a BW tee in a pipesystem,what about its specification and advantages.
The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.
Steel tee is a T-shaped pipe fittings that has three branches, normally has two forms with Equal Tee and Reducing Tee, both are used to divide the pipelines to adjust the flow rate and change the direction.
What is a pipe bend,what about its specification and its difference between a elbow
What is a pipe Tee,its specification and importance.
What is a Weldolet and what about its specificaton and advantange.
What is a STEEL PIPE TE and what about its specification and advantages.
What is a 90 DEGREE LR ELBOW and what about its specification and advantages.
0 degree elbow, also called “90 bends or 90 elbows”, are manufactured as SR (Short Radius) elbows and LR (Long Radius) elbows.
Concentric reducer consists of the symmetrical and conical shaped fittings that enlarge or reduce the diameter equally about the center line.
90 degree steel pipe elbow functioned to change fluid direction by 90 degree, so also named as vertical elbow. A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.
Steel pipe bend two pipes into a certain angle and connects them together to change the direction of the pipe. it could be bend directly from a finished pipe with cold bending processes, to different degrees.
45 ° elbow is also called “45 elbow or 45 ell”, and its bending mode can change the flow direction of fluid / gas in the pipeline by 45 °. The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.
Reducing tee is a commonly used fittings to branch the pipes and reduce the flow in the piping systems.Large dimension is for butt welded fittings.ASME B16.9 pipe fittings are BW fittings according to American Standard,the size range for the ASME B16.9 fittings is 1/2″-80″.
What is Galvanizing?
Galvanizing, or galvanization, is a manufacturing process where a coating of zinc is applied to steel or iron to offer protection and prevent rusting. There are several galvanizing processes available, but the most commonly offered and used method is called hot-dip galvanizing.
DN1200 BW elbow is belong to large dimension fittings,these fittings always be butt welded fittings because of the large size.Butt welded fittings used welded type to connect with the pipes to achieve strong and permanent connection.
BW Reducing tee is one type of pipe tees,the other type is equal tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.Carbon steel fittings are used in many applications because of its great excellent functions.
Elbow is a fitting device which is bent in such a way to produce 90 degree change in the direction of flow of the content in the pipe.