ASTM A105N Carbon Steel Threaded Flange ASME B16.5

SW flange can be used in many applications in piping systems.SW Flanges are forged flanges.Socket weld flange has many classes:150LB, 300LB, 600LB, 900LB, 1500LB, 2500LB.Stainless steel flanges have better functions than other flanges which made from carbon steel or alloy steel.

Socket Weld Flange contain a shoulder on the flange inside that acts as a guide to set the depth at which the pipe is welded to the flange.

A flange can be defined as a method that helps in connecting pipes, valves, etc., to form a full piping system. There are six flange classes ranging from #150 to #2500. Governed by B 16.5 standards, the ASME B16. 5 Class 300 Flange provides a pressure capacity of 300Lb.

l. Large diameter flat welding flange has less high-pressure suitability compared to its weld neck counterpart. The basic ring style is suitable for the occasion of low pressure. The butt weld category of the flange is known as a weld neck flange. It suits the occasion of high temperature and pressure as defined in the ASME B16.47 code. Large diameter flanges are widely popularized and used in the sewage treatment industry, wind power industry, chemical industry, and machinery industry.

Slip on flange, also called SO flange. It’s a kind of flange slides over the pipe with internal design is slightly larger than the pipe. Since the inner diameter of the flange is slightly larger than the outer diameter of the pipe, the SO flange can be directly connected to equipment or pipe by fillet weld at the top and bottom of the flange. It is used to insert the pipe into the inner hole of the flange.

What is a blind flang,what about its specification and advantage.

Reducing pipe (reducing nipple) is a pipe fitting used for straight-line connection of two pipes with different sizes to realize pipe diameter reduction. There are concentric reducing joints and eccentric reducing joints

The purpose of these is to block off a section of pipe or a nozzle on a vessel that is not used. (A nozzle is typically a pipe coming out of a vessel and is usually flanged so it can be connected to valves or piping). Many times a nozzle will be blanked off with a blind flange for pressure tests in a plant, or simply because the customer does not need all the nozzles that were supplied on the tank.

ASME B16. 5 is limited to flanges and flanged fittings made from cast or forged materials, and blind flanges and certain reducing flanges made from cast, forged, or plate materials. Also included in this Standard are requirements and recommendations regarding flange bolting, flange gaskets, and flange joints.

Class 1500 SO flange Flanges have many pressures:CL300, CL600, CL900, CL1500, CL2500.Flanges have five face types:RF RTJ FF MF TG. Slip on flanges can slip on the pipes and welding with the pipes.

Stainless steel slip on flanges are popular type of flanges because of the great material and flexible applications.Pressures of flanges:CL150,CL300,CL600,CL900,CL1500,CL2500.ASTM A182 F316L and ASTM A182 F304 are both popular grades of stainless steel.

Stainless steel flange, also called SS flange, it means the material of flange is stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500.

The slip-on flange is a simple and excellent alternative to a weld neck as it does not have a weld bevel, and therefore allows the pipe to be adjusted in length relative to its position of the flange. The bore of the slip on will give ample amount of space for the matching pipe.

orged steel flange is a disc-shaped piece of equipment used to connect a pipe to fittings or valve or other component to form a pipework system. Usually flange has been attached to pipe or tube end to, and then a gasket is inserted in the middle to form a seal. Finally they are joined together with bolts and nuts.

CL 600 slip on flanges are commonly used type of flanges.ASTM A182 F316L is a popular grade for stainless steel.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel flanges can used over 50 years.

What is a weld neck flange and its specification?

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

1500 LB SO flanges are belong to high pressure flanges.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.Flange dimension has a very large range to meet different demands.

Stainless steel flange is popular because stainless steel has great anti-corrosive function.Flanges can be many types:WN,SO,SW,THD,LAPJ,BL.These flanges use different connections to connect with the pipes.Shanghai Zhucheng is a high quality manufactory who can supply all types of flanges.

Carbon Steel: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317,347,904L， 1.4404, 1.4437.
Duplex Stainless Steel: ASTM A182 F51, F53, F44

High pressure flange carbon steel material: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH

A182 F304 forged flanges are stainless steeel flanges,ASME B16.5 SW flanges are socket weld flanges following American Standard specifications.

900LB slip on flange can slip on the pipes and welded with the pipes.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel flange can used over 50 years.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

Slip on flange, also called SO flange. It’s a kind of flange slides over the pipe with internal design is slightly larger than the pipe. Since the inner diameter of the flange is slightly larger than the outer diameter of the pipe, the SO flange can be directly connected to equipment or pipe by fillet weld at the top and bottom of the flange. It is used to insert the pipe into the inner hole of the flange.

Class 600 WN flange is a high pressure flange.Flanges have many pressures:CL300, CL600, CL900, CL1500, CL2500.ASME B16.5 is the American Standard for flanges.Flanges have five face types:RF RTJ FF MF TG.

Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317,347,904L, 1.4404, 1.4437.

It is used to insert the pipe into the inner hole of flange, as the flange inner diameter is little bigger than the pipe’s outer diameter, pipe and flange could be connected by lap welding at the top and bottom of the flange.

18in CL600 WN flange is belong to large dimension flanges.ASME B16.5 is standard for forged flanges.Forged flanges have important functions in high pressure enverionments.

What is a Blind Flange?Where are Blind Flanges Most Commonly Used?