ASTM a182 316L Socket Weld 90 degree Elbow

BSP Pipe Fittings Specification:
Type: Elbow /Tee /Cross /Coupling /Cap/Union /Nipple /Plug /Bushing
Material: CS/LOW TEMP CS/PIPELINE STEEL/ALLOY STEEL /SS/ DUPLEX SS
Standard: ASME B16.11, BS3799
Size: 1/8IN-4IN/DN6-DN10
Rating: 2000lbs,3000lbs,6000lbs
British Standard Pipe Parallel (BSPP)

Features of Pipe cross:

Pipe Tee is a most frequently used pipe fitting or connector nowadays. It functions the same as olets that means it is used to take a branch connection for linear pipeline. As the name TEE represents, the shape is T-shaped with two outlets, at 90° to the connection to the main line

The specification of ASTM A182 Forged Pipe Fittings includes forged fittings, stainless steel, rolled alloy, forged alloy, pipe flanges as well as high-temperature service. Later then forgings and hot working, it would be cooled down to a certain temperature before heat treatment.
The Alloy Steel A182 Threaded Elbow material grade contains ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Swaging nipples is divided into tubing sub and casing sub. Flanging nipple in pipe connection is commonly used with flange. Diameter pipe (reducing nipple) is a pipe fitting used for straight connection of two pipes with different sizes to realize pipe diameter reduction. There are concentric reducing joints and eccentric reducing joints

Threaded fittings are available in pressure ratings Class 2000, 3000, and 6000; Socket welding fittings are available in pressure ratings Class 3000, 6000, and 9000. Generally, both fittings size range is 1/8″- 4″or DN6-DN100.

The diameter range of reducer and swage nipple is different. Generally speaking, pipe reducer measures from 1/2” to 80”, and swage nipple is available within 12”.

What is a Threaded nipple and what about its specification and advantages.

Swage Nipple are similar to reducers, but they’re smaller, and they’re used to link larger screwed, or socket welded pipes to smaller screwed or socket welded pipes. They come in concentric and eccentric varieties, just like reducers. Swages come in a variety of end

The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. The use of Forged End Pipe Caps is common in many industries such as oil and gas industries, chemical industries and water supply lines.

Class 150 WN flange is the lowest pressure flange in all the flanges,langes also have many pressures:CL300, CL600, CL900, CL1500, CL2500.ASTM A105 is the matal standard for forged flanges and fittings.

Slip-On flanges are commonly lower in price than weld-neck flange.However, customers should bear in mind that this initial cost saving may be diminished by the additional cost of the two fillet welds required for proper installation.

The use of Forged End Pipe Caps is common in many industries such as oil and gas industries, chemical industries and water supply lines.

Size Range: 1/8″ –  4″ / DN6 – DN100
Schedule Chart: STD, XS, SCH 160
Standard: MSS SP-97
Carbon Steel: ASTM A105 / A105N
Low Temp Carbon Steel: ASTM A350 LF2/LF3
Pipeline Steel: ASTM A694 F42/46/56/60/65
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L
Duplex Stainless Steel ASTM A182 F51, F53, F44

Concentric Swage Nipple and Eccentric Swage Nipple. Like Pipe Reducer, Concentric swage nipple is symmetrical, both ends are aligned along the center, used in vertical pipes, Eccentric swage nipple is not symmetrical, ends are off center of one another and used in horizontal pipes..

The slip-on flange is a simple and excellent alternative to a weld neck as it does not have a weld bevel, and therefore allows the pipe to be adjusted in length relative to its position of the flange. The bore of the slip on will give ample amount of space for the matching pipe.

Socket weld elbow is a forged fitting belongs to SW fittings,SW fittings can be socketed with pipes and then welded with the pipes.SW fittings have serive of pressures:Class 3000,Class 6000,Class 9000.Among these,the most used pressure is Class 3000.

SPECIFICATION Of Socket Weld Elbows and its advantages.

There are various types of ASME B16.11 socket-welding fittings, such as Elbow, Cross, Tee, Coupling, Half Coupling, Boss, Cap, Union and Sockolet; while ASME B16.11 threaded fittings can be furnished in product forms of Elbow, Cross, Tee, Coupling, Half Coupling, Boss, Cap, plug and bushing.

Threaded Pipe Fittings Specification
Shape: Elbow,Tee, Cross, Coupling, Cap, Swage Nipple, Bushing, Plug, Nipple, Union, Hex Nipple,Threadolet.
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Range: Class 2000lbs, 3000lbs, 6000lbs
Thread Type: NPT, PT, BSPP, BSPT, PF
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

The main pipe of these tee is different from the diameter of the branch pipe, and the diameter of the main pipe is larger than that of the branch pipe.

Size Range: 1/8″ –  4″ / DN6 – DN100
Schedule Chart: STD, XS, SCH 160
Standard: MSS SP-97
Carbon Steel: ASTM A105 / A105N
Low Temp Carbon Steel: ASTM A350 LF2/LF3
Pipeline Steel: ASTM A694 F42/46/56/60/65
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L
Duplex Stainless Steel ASTM A182 F51, F53, F44

High Pressure Tube Fittings is available in Stainless Steel, Carbon Steel and Alloy Steel. Different from buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.

Class 3000 threaded union is the most used pressure of threaded union.ASME B16.11 is the standard for forged fittings according to American Standard.

Type: Full and Half Coupling
Shape: Straight and Reducing Coupling
Thread Type: NPT, PT, BSPP, BSPT, PF
Size Range: 1/8″ –  4″ / DN6 – DN100

TOE means threaded at one end when translated. Thus, we can say that a nipple TOE is a nipple that has one threaded end.
In this case, we have the acronym TBE for “threaded both ends” which means threaded at both ends. In other words, this is the most typical type of nipple as described above for connecting two parts or fittings with female threading.

Pipe Swage Nipple (also known as reducing nipple) is divided into tubing sub and casing sub. Flanging nipple in pipe connection is commonly used with flange.