Forged socket welded couplings ASME B16.11 3000/6000/9000 LB

Socket weld 45 deg lateral tees are belong to pipe tees,but is a special type of pipe tees.These lateral tees could change the direction in 45 degree of the pipes.

Class 3000 SW tee is a commonly used socket weld fitting.There are many pressures for SW fittings:3000,6000,9000.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

A105N class 3000 socket weld elbow is belong to ASME B16.11 forged fitting.These elbows can be 45 deg and 90 deg,and they can also be straight or reducing types.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

A182 SS304L sockolet can makes a 90 degree branch from the pipe system .It has full size and reducing size.Shanghai Zhucheng is a high quality steel pipe fittings factory to supply many types of flanges for years.

Size Range: 1/8″ –  4″ / DN6 – DN100
Schedule Chart: STD, XS, SCH 160
Standard: MSS SP-97
Carbon Steel: ASTM A105 / A105N
Low Temp Carbon Steel: ASTM A350 LF2/LF3
Pipeline Steel: ASTM A694 F42/46/56/60/65
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L
Duplex Stainless Steel ASTM A182 F51, F53, F44

Socket Weld half Coupling is a coupling with a socket weld only at one end, It is usually welded directly to the pipeline to form a branch connection. Coupling for joining a pipe to another of smaller diameter. Straight coupling connects two pipes end-to-end. It is used to supplement the infinite aluminum pipe.

SW tees have two types:Equal and Reducing.SW fittings have same ranges of size(1/8”-4”) and pressures(2000lb,3000lb,6000lb,9000lb).Class 3000 is the most common used among these pressures.Class 3000 can be labeled as 3M,where M means 1000,class 3000 fittings can withstand up to 3000 PSI.

ASME B16.11 is the standard contains ratings, dimensions, tolerances, marking and material requirements for forged fittings, both socket-welding and threaded. Threaded fittings are available in pressure ratings Class 2000, 3000, and 6000; Socket welding fittings are available in pressure ratings Class 3000, 6000, and 9000.

What is a Socket weld Uninon,what about its speicification and advantage

Socket weld pipe fittings is a family member of forged steel fittings, which used for small bore pipes and piping systems (generally below 4 inches). We usually manufacture them according to ASME B16.11 standard.

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

ASTM A105 Swage Nipple is a type of carbon Steel Pipe Fittings and commonly used for connection two pipes with different diameters. It belongs to pipe reducers and are used in small pipe size more often.

A182 F316 socket weld fittings are popular stainless steel forged fittings because of the superior anti-corrosive function.SW fittings including Elbow, Tee, Cross, Coupling, Union, Cap, Reducing Insert, Sockolet.

5IN socket welded coupling is a commonly used forged fitting in piping systems.ASME B16.11 pipe fittings are forged pipe fittings including SW fittings and THD fittings.Socket welded coupling can socketed with the pipes and then welded on pipes.

Features of Pipe cross:

The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. The use of Forged End Pipe Caps is common in many industries such as oil and gas industries, chemical industries and water supply lines.

Coupling is a connector used to screw two pieces of pipe together using threaded rings, It is used for fittings that connect two pipes more closely in a piping system. .Socket Weld half Coupling is a coupling with a socket weld only at one end, It is usually welded directly to the pipeline to form a branch connection.

What is a SOCKET WELD-90 DEGREE ELBOW,what about its speicification and advantage

What is a SW Union and what about its specification and usage.

Flush Bushing: Flush bushing are used in piping systems. They are installed in the pipe to reduce the size of the pipe. Forged bushing is ideal for use with water and oil in chemical, petrochemical, pulp, paper, shipbuilding, waste incineration, and semiconductor industry applications.