A105 A182 socket elbow 90 degree ASME B16.11 6000LBS

What is a SW Union and what about its specification and usage.

Socket Weld 90 Degree Elbow makes 90°changes of course within the run of pipe to create a channeling framework. Socket Weld 90 Elbow is planned for wide utilize totally different industries like oil refineries, chemical processing, petrochemical, and numerous other businesses.

Socket weld pipe fittings is a family member of forged steel fittings, which used for small bore pipes and piping systems (generally below 4 inches). We usually manufacture them according to ASME B16.11 standard.

There are various types of ASME B16.11 socket-welding fittings, such as Elbow, Cross, Tee, Socked Weld Coupling , Half Coupling, Boss, Cap, Union and Sockolet.

There are various grade for Stainless Steel Forged Pipe Fittings: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L，1.4404, 1.4437.

It is usually welded directly to the pipeline to form a branch connection. Couplings do not normally allow disconnection of shafts during operation, however there are torque-limiting couplings which can slip or disconnect when some torque limit is exceeded.

Socket welded tee are generally suitable for pipes with a nominal diameter of NPS 2 or less.

High Pressure Pipe Fittings is available in Stainless Steel, Carbon Steel and Alloy Steel. Different from buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. The use of Forged End Pipe Caps is common in many industries such as oil and gas industries, chemical industries and water supply lines.

Socket Weld 90 Elbow is planned for wide utilize totally different industries like oil refineries, chemical processing, petrochemical, and numerous other businesses.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45°,90° and 180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Stainless steel SW elbow used socket connection with pipes and then welded on the pipes.ASTM A182 F304 is a commonly used grade for stainless steel fittings.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

The socket weld elbow is resistance corrosion/pitting/oxidation/stress corrosion cracking and crevice corrosion

Forged socket weld elbow is available in 90 degree and 45 degree that used to connect the ASME pipe to fittings or valves by fillet seal welding. It has varieties of features such as reliability, durability and dimensional precision.

Different from buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.

Available at90 degree and 45-degree angles, these fittings allow pipe runs to change direction. SW elbows can be either short radius or long radius designs as required.

How Socket Welding Works and Classification of Socket Weld Coupling

ASTM A105 Swage Nipple is a type of carbon Steel Pipe Fittings and commonly used for connection two pipes with different diameters. It belongs to pipe reducers and are used in small pipe size more often.

These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

Class 3000 SW tee is a commonly used socket weld fitting.There are many pressures for SW fittings:3000,6000,9000.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

SW elbow is used to socket with the end of pipe and welding on it.Socket weld elbow is belong to forged fittings which are used as high pressure fittings,SW fittings can be 2000lb,3000lb,6000lb.

5in SW elbow is used to socketed with pipes and then welded on pipes.ASME B16.11 pipe fittings mean forged pipe fittings.Forged pipe fittings can be divided in socket weld fittings and threaded fittings.

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

What is a Socket Weld 90 Degree Elbow,What about its specificaion and advantages.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.