ASTM A106 Lateral Tee Class 3000 Pipe Fittings

5in SW elbow is used to socketed with pipes and then welded on pipes.ASME B16.11 pipe fittings mean forged pipe fittings.Forged pipe fittings can be divided in socket weld fittings and threaded fittings.

Socket Weld Fittings Specification
Shape: Elbow, Tee, Cross, Coupling, Union, Cap, Reducing Insert, Sockolet
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Rating: Class 3000lbs, 6000lbs, 9000lbs
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

Socket Weld Tee Material: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH

The branch pipe has two outlets and is perpendicular to the main pipe. It is used to change the direction of the pipe so that the pipe is 90 degrees perpendicular to the pipe.

SW elbow is used to socket with the end of pipe and welding on it.Socket weld elbow is belong to forged fittings which are used as high pressure fittings,SW fittings can be 2000lb,3000lb,6000lb.

Class 3000 SW coupling can manufactured as full coupling and half coupling.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.Socket weld fittings can be CL3000,CL6000 and CL9000.

SW tee can socketed with the pipes and welding with the pipes.ASME B16.11 fittings are forged fittings according to American Standard.Tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

According to its radius of curvature, there are long radius elbow and short radius elbow. Long radius elbow refers to its radius of curvature is equal to 1.5 times the outside diameter of the pipe, that is, R=1.5D; A short radius elbow means that its radius of curvature is equal to the outer diameter of the pipe, that is, R= 1.0d.(D is the diameter of the elbow, and R is the radius of curvature).

Flush Bushing: Flush bushing are used in piping systems. They are installed in the pipe to reduce the size of the pipe. Forged bushing is ideal for use with water and oil in chemical, petrochemical, pulp, paper, shipbuilding, waste incineration, and semiconductor industry applications.

Size Range: 1/8″ –  4″ / DN6 – DN100
Schedule Chart: STD, XS, SCH 160
Standard: MSS SP-97
Carbon Steel: ASTM A105 / A105N
Low Temp Carbon Steel: ASTM A350 LF2/LF3
Pipeline Steel: ASTM A694 F42/46/56/60/65
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L
Duplex Stainless Steel ASTM A182 F51, F53, F44

Features of Pipe cross:

The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. The use of Forged End Pipe Caps is common in many industries such as oil and gas industries, chemical industries and water supply lines.

These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

Stainless steel sockolet is belong to forged pipe fittings,the most used pressure is Class3000.In addition,there are also class6000,class9000 for the stainless steel sockolet.

Equal  Elbow

Equal elbow is an elbow with the same diameter at both ends, which is characterized in that the pipeline connecting the two necks belongs to the same specification.

Reducing  Elbow

Reducing elbows connect two pipes of different diameters to reduce the diameter when the pipe rotates.

High Pressure Pipe Fittings is available in Stainless Steel, Carbon Steel and Alloy Steel. Different from buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.

We are the ISO certified manufacturer from China. Our main products contains steel pipe, pipe fittings and flanges in carbon steel, alloy steel and stainless steel.

What is a SW Union and what about its specification and usage.

Socket welded tee are generally suitable for pipes with a nominal diameter of NPS 2 or less.

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

What is a SOCKET WELD-90 DEGREE ELBOW and what about its specification and advantages.

What is a Socket weld cross and what about its specificaton and advantange.

What is a Socket weld Uninon,what about its speicification and advantage

Carbon Steel: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L，1.4404, 1.4437.
Duplex Stainless Steel: ASTM A182 F51, F53, F44