SW Tee Elbow SW Fittings Supplier
SW tee and elbow are both socket weld fittings used in piping system.These fittings used to connect the pipes and transport flow. Shanghai Zhucheng is an excellent SW fittings supplier who supplys high quality pipe fittings and flanges for years.
Socket Weld(SW) fittings are high pressure fittings which are used in the pipe system,and only in conjunction with ASME pipes.SW fittings have same ranges of size(1/8”-4”) and pressures(2000lb,3000lb,6000lb,9000lb).Shanghai Zhucheng Pipe Fittings Manufacturing Co Ltd is an experienced sw fittings supplier from China.
Socket Welded (SW) Tee
The sw tee is a “T” type pipe fitting. The branch pipe has two outlets and is perpendicular to the main pipe. It is used to change the direction of the pipe so that the pipe is 90 degrees perpendicular to the pipe.
Equal：This is a Pipe fitting with the same size on three sides.
Reducing：The main pipe of these tee is different from the diameter of the branch pipe, and the diameter of the main pipe is larger than that of the branch pipe.
They have applications in many industries,including chemical processing, petroleum, refining, marine waste treatment, utilities / power generation, industrial equipment, natural gas compression and distribution industries. Tee pipe is also recommended for industrial equipment hydrodynamic system.
Socket Welded(SW) elbow
Socket Welded(SW) elbow is belong to forged fittings.Socket Weld(SW) fittings are high pressure fittings which are used in the pipe system,and only in conjunction with ASME pipes.SW fittings have same ranges of size(1/8”-4”) and pressures(2000lb,3000lb,6000lb,9000lb).
Class 3000 is the most common used among these pressures.Class 3000 can be labeled as 3M,where M means 1000,class 3000 fittings can withstand up to 3000 PSI.
90 degree elbow: These elbows can change the direction of the pipe by 90 degrees.
45 degree elbow: These Threaded Elbows make 45°changes of direction in the run of the pipe.
Straight elbow: The diameter of both ends of these elbows is the same.
Reducing elbow: A reducing elbow is a type of fitting which is used to join two pieces of pipe of different sizes.
|Size Range||1/8″ – 4″ / DN6 – DN100|
|Pressure Rating||Class 3000lbs, 6000lbs, 9000lbs|
|Standard||ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97|
|Carbon Steel||ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH|
|Alloy Steel||ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22|
|Stainless Steel||ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L，1.4404, 1.4437.|
|Duplex Stainless Steel||ASTM A182 F51, F53, F44|