ASME B16.11 Threaded Swage Nipple Manufacturer

The branch pipe has two outlets and is perpendicular to the main pipe. It is used to change the direction of the pipe so that the pipe is 90 degrees perpendicular to the pipe.

Size Range: 1/8″ –  4″ / DN6 – DN100
Schedule Chart: STD, XS, SCH 160
Standard: MSS SP-97
Carbon Steel: ASTM A105 / A105N
Low Temp Carbon Steel: ASTM A350 LF2/LF3
Pipeline Steel: ASTM A694 F42/46/56/60/65
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L
Duplex Stainless Steel ASTM A182 F51, F53, F44

The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. The use of Forged End Pipe Caps is common in many industries such as oil and gas industries, chemical industries and water supply lines.

There are various grade for Stainless Steel Forged Pipe Fittings: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L，1.4404, 1.4437.

What is a SW Union and what about its specification and usage.

Socket Weld Coupling material can be divided into carbon steel, alloy steel and stainless-steel.
Socket welding Pipe fittings are available in pressure ratings Class 3000, 6000, and 9000.
There are various types of  socket-welding Tube fittings, such as Elbow, Cross, Tee, Coupling, Half Coupling, Boss, Cap, Union and Sockolet

SW full coupling is used to connect two pipes.Couplings can be full coupling and half coupling.ASME B16.11 pipe fittings are forged fittings including SW fittings and THD fittings.Socket weld fittings have many pressures:CL3000,CL6000,CL9000.

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

What is a Socket weld Uninon,what about its speicification and advantage

Socket Weld Fittings Specification
Shape: Elbow, Tee, Cross, Coupling, Union, Cap, Reducing Insert, Sockolet
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Rating: Class 3000lbs, 6000lbs, 9000lbs
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

ASTM A182 F316 socket weld couplings are used in many industires because stainless steel have a very long using period.SW fittings are belong to ASME B16.11 forged fittings,only can used with small size pipes in ASME Standard.The pressures have #3000,#6000,#9000 to choose.

SW half coupling is a type of socket weld coupling,the other type is full coupling.ASTM A182 F304 forged fittings are stinless steel pipe fittings used in many corrosive environments.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

What is a SOCKET WELD-90 DEGREE ELBOW and what about its specification and advantages.

Socket weld elbow is a forged fitting belongs to SW fittings,SW fittings can be socketed with pipes and then welded with the pipes.SW fittings have serive of pressures:Class 3000,Class 6000,Class 9000.Among these,the most used pressure is Class 3000.

High Pressure Tube Fittings is available in Stainless Steel, Carbon Steel and Alloy Steel. Different from buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.

SW tees have two types:Equal and Reducing.SW fittings have same ranges of size(1/8”-4”) and pressures(2000lb,3000lb,6000lb,9000lb).Class 3000 is the most common used among these pressures.Class 3000 can be labeled as 3M,where M means 1000,class 3000 fittings can withstand up to 3000 PSI.

Socket weld cross is a pipe fitting used to transport flow in the piping system.SW fittings are belong to forged steel pipe fittings,the other type of forged fitting is threaded fittings.Forged fittings are high pressure fittings used in many applications.

What is a SW fiting and how about a SW Elbows’ specification?

A182 F316 socket weld fittings are popular stainless steel forged fittings because of the superior anti-corrosive function.SW fittings including Elbow, Tee, Cross, Coupling, Union, Cap, Reducing Insert, Sockolet.

Features of Pipe cross:

Socket Weld Coupling material can be divided into carbon steel, alloy steel and stainless-steel, and the pressure ratings is Class 3000, 6000, or 9000.

ASME B16.11 forged fittings are popular because of the famous American Standard and the variety products.Socket weld (SW) fittings and threaded (THD) fittings are both forged fittings.Stainless steel pipe fittings are always chosen in corrosive and chemical environments.

There are two types of tees:Equal Tee and Reducing Tee.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Couplings are used to help extend or terminate runs and to change pipe sizes and are designed to provide good flow characteristics. We supplied many A105 carbon steel and 316 stainless steel socket weld fittings to customers. Socket Weld Fittings are a family of high pressure forging fittings that used only in conjunction with ANSI Pipe and are available in the same size range.

Socket welded elbow can socket with pipes and welded on pipes.SW fittings are belong to forged fittings,the other type of forged fitting is threaded fittings.Forged fittings are high pressure fittings used in many applications.

Socket Weld half Coupling is a coupling with a socket weld only at one end, It is usually welded directly to the pipeline to form a branch connection. Coupling for joining a pipe to another of smaller diameter. Straight coupling connects two pipes end-to-end. It is used to supplement the infinite aluminum pipe.