Sw Tee Equal Reducing ASME B16.11 Carbon steel material

What is a SW 45 degree elbow fittings ,and its specification and advantage.

Socket welded elbow can socket with pipes and welded on pipes.SW fittings are belong to forged fittings,the other type of forged fitting is threaded fittings.Forged fittings are high pressure fittings used in many applications.

Size Range: 1/8″ –  4″ / DN6 – DN100
Schedule Chart: STD, XS, SCH 160
Standard: MSS SP-97
Carbon Steel: ASTM A105 / A105N
Low Temp Carbon Steel: ASTM A350 LF2/LF3
Pipeline Steel: ASTM A694 F42/46/56/60/65
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L
Duplex Stainless Steel ASTM A182 F51, F53, F44

A Socket Weld Fittings is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. Once correctly inserted, fillet type sealing welds are applied to join the pipe to the fitting.

CL3000 carbon steel lateral tees are not a common used fittings but have an important role in pipe systems.Forged socket weld fittings are always be chosen because of the excellent leak-proof function.These lateral tees have run pipe with 45 deg from main pipe.

ASTM A105 Swage Nipple is a type of carbon Steel Pipe Fittings and commonly used for connection two pipes with different diameters. It belongs to pipe reducers and are used in small pipe size more often.

It is usually welded directly to the pipeline to form a branch connection. Couplings do not normally allow disconnection of shafts during operation, however there are torque-limiting couplings which can slip or disconnect when some torque limit is exceeded.

Socket Weld half Coupling is a coupling with a socket weld only at one end, It is usually welded directly to the pipeline to form a branch connection. Coupling for joining a pipe to another of smaller diameter. Straight coupling connects two pipes end-to-end. It is used to supplement the infinite aluminum pipe.

A182 SS304L sockolet can makes a 90 degree branch from the pipe system .It has full size and reducing size.Shanghai Zhucheng is a high quality steel pipe fittings factory to supply many types of flanges for years.

SW tee and elbow are both socket weld fittings used in piping system.These fittings used to connect the pipes and transport flow. Shanghai Zhucheng is an excellent SW fittings supplier who supplys high quality pipe fittings and flanges for years.

Carbon steel pipe fittings are used in many applications because of its great excellent functions.Carbon steel pipe fittings can manufactured as THD (threaded) fittings,SW (socket weld) fittings and (BW) butt welded fittings.The specifications are in the content below.

Socket weld Elbow forged fitting has varieties of features such as reliability, durability and dimensional precision.

SW full coupling is used to connect two pipes.Couplings can be full coupling and half coupling.ASME B16.11 pipe fittings are forged fittings including SW fittings and THD fittings.Socket weld fittings have many pressures:CL3000,CL6000,CL9000.

Stainless steel SW elbow used socket connection with pipes and then welded on the pipes.ASTM A182 F304 is a commonly used grade for stainless steel fittings.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

The branch pipe has two outlets and is perpendicular to the main pipe. It is used to change the direction of the pipe so that the pipe is 90 degrees perpendicular to the pipe.

A Socket Weld Tube Fittings is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. Once correctly inserted, fillet type sealing welds are applied to join the pipe to the fitting.

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45°,90° and 180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

The socket weld elbow is resistance corrosion/pitting/oxidation/stress corrosion cracking and crevice corrosion

What is a socket weld elbow and why do socket welders need a gap?

Stainless steel sockolet is belong to forged pipe fittings,the most used pressure is Class3000.In addition,there are also class6000,class9000 for the stainless steel sockolet.

Carbon Steel: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L，1.4404, 1.4437.
Duplex Stainless Steel: ASTM A182 F51, F53, F44

What is a SOCKET WELD-90 DEGREE ELBOW,what about its speicification and advantage

What is a Socket Weld Outlet and what about its specification and advantages.

Socket Weld Fittings Specification
Shape: Elbow, Tee, Cross, Coupling, Union, Cap, Reducing Insert, Sockolet
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Rating: Class 3000lbs, 6000lbs, 9000lbs
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

SW tees have two types:Equal and Reducing.SW fittings have same ranges of size(1/8”-4”) and pressures(2000lb,3000lb,6000lb,9000lb).Class 3000 is the most common used among these pressures.Class 3000 can be labeled as 3M,where M means 1000,class 3000 fittings can withstand up to 3000 PSI.

What is a SW fiting and how about a SW Elbows’ specification?