ASME B16.11 Threaded Tee

SS316L Threaded Pipe fittings provide permanent welded connections for pipes. Threaded Steel Coupling is a short piece with screw in NPT or BSP ends or one end.

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

We specialize in manufacturing ASME B16.11 Threaded Tees, which are widely used in high-pressure piping systems.

MSS SP-97 Threadolethas the outstanding advantages of safety and reliability, cost reduction, simple construction, improved medium flow channel, series standardization, and convenient design and selection

It is used for all kinds of equipment such as paper/pulp, petrochemical, general industrial machinery, shipbuilding, electronic equipment, vehicles, housing, water treatment, etc.

ASME B16.11 forged fittings are popular because of the famous American Standard and the variety products.Socket weld (SW) fittings and threaded (THD) fittings are both forged fittings.Stainless steel pipe fittings are always chosen in corrosive and chemical environments.

Socket Weld half Coupling is a coupling with a socket weld only at one end, It is usually welded directly to the pipeline to form a branch connection. Coupling for joining a pipe to another of smaller diameter. Straight coupling connects two pipes end-to-end. It is used to supplement the infinite aluminum pipe.

A threaded bushing, also known as a threaded insert, is a fastener element that is inserted into an object to add a threaded hole. Bushing Threaded Types: NPT  PT  BSPP  BSPT  PF.

Swaging nipple (also known as reducing nipple) is a forged pipe fitting. It is used to change the diameter of the pipe and connect two pipes of different sizes.

The length of the threaded nipple is usually determined by the total length of the thread. Swaging nipple (also known as reducing nipple) is a forged pipe fitting. It is used to change the diameter of the pipe and connect two pipes of different sizes.

What is a threaded elbow,what about its specification and its advantages.

Threaded pipe fittings provide permanent welded connections for pipes. Threaded joints probably represent the oldest method of joining piping systems. Same as Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.
They are available in three pressure ratings: 2000lbs, 3000lbs and 6000lbs.

Equal tees are available in sizes from half an inch to 48 inches (or larger) and in seamless and welded execution (seamless up to 24 inches, welded for tee sizes above 24 inches).

Threaded tee used thread connection to combine with pipes.ASME B16.11 fittings are forged fittings belong to American Standard.Tees can divided as equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

Threaded Pipe Fittings Specification
Shape: Elbow,Tee, Cross, Coupling, Cap, Swage Nipple, Bushing, Plug, Nipple, Union, Hex Nipple,Threadolet.
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Rating: Class 2000lbs, 3000lbs, 6000lbs
Thread Type: NPT, PT, BSPP, BSPT, PF
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

 90 Degree Carbon steel elbow is a pipe fitting with a 90 degree bending angle. It connects two pipes and changes the direction of the pipes at right angles, ensuring that the fluid flows along a predetermined path in the pipe system.

The equal cross is one kind of the pipe cross,  the equal cross means all the 4 ends of the cross are in same diameter.
The reducing cross also is called unequal pipe cross , it is the pipe cross which the four branch ends are not in the same diameters.

Equal tees are available in sizes from half an inch to 48 inches (or larger) and in seamless and welded execution (seamless up to 24 inches, welded for tee sizes above 24 inches).

Used for all sorts of media: chemical substances, petrochemical products, liquefied gas – especially in loading/unloading applications. There are also couplings intended for highly aggressive chemical substances, lined with ECTFE – a polymer resistant to chemicals.

Threaded couplings used thread connection to connect two pipes.Threaded coupling is belong to forged steel fittings.The other type of forged fitting is socket weld fittings.All the forged fittings are high pressure pipe fittings.

Class 3000 hex head plugs are used in the end of piping systems or equipments to achieve close function.ASTM A182 F304 forged pipe fittings are the most common used stainless steel pipe fittings because of the reasonable price and superior functions.Threaded plugs have 3000lb and 6000lb pressures for customers to choose.

This is a Pipe fitting with the same size on three sides. It is used to change the direction of the pipe so that the pipe is 90 degrees perpendicular to the pipe.

What is a Threaded Coupling,what about its specification and its advantages.

Threaded Pipe Fittings Specification
Shape: Elbow,Tee, Cross, Coupling, Cap, Swage Nipple, Bushing, Plug, Nipple, Union, Hex Nipple,Threadolet.
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Range: Class 2000lbs, 3000lbs, 6000lbs
Thread Type: NPT, PT, BSPP, BSPT, PF
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97