ASTM A182 F304 600LB Slip On Flanges ASME B16.47 Series A & B

The smooth transition between the flange and the hub combined with the strength of the butt weld joint, allows the flange to be used in extreme conditions of cyclic loading, bending and temperature fluctuations.

What is a blind flang,what about its specification and advantage.

Class 600 WN flange is a high pressure flange.Flanges have many pressures:CL300, CL600, CL900, CL1500, CL2500.ASME B16.5 is the American Standard for flanges.Flanges have five face types:RF RTJ FF MF TG.

600LB Silp On (SO) Flange can slip on the pipes and welding with the pipes.Stainless steel flange are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Stainless steel 316L LAPJ flange has great anti-corrosive function,it always used with lap joint stub end of same material.ASME B 16.5 forged flange have soem pressures:CL150,CL300,CL600,CL900,CL1500,CL2500.You could find the comparison between LAPJ flanges,SO flanges and WN flanges below.

TOE means threaded at one end when translated. Thus, we can say that a nipple TOE is a nipple that has one threaded end.
In this case, we have the acronym TBE for “threaded both ends” which means threaded at both ends. In other words, this is the most typical type of nipple as described above for connecting two parts or fittings with female threading.

A182 F304 forged flanges are stainless steeel flanges,ASME B16.5 SW flanges are socket weld flanges following American Standard specifications.

l. Large diameter flat welding flange has less high-pressure suitability compared to its weld neck counterpart. The basic ring style is suitable for the occasion of low pressure. The butt weld category of the flange is known as a weld neck flange. It suits the occasion of high temperature and pressure as defined in the ASME B16.47 code. Large diameter flanges are widely popularized and used in the sewage treatment industry, wind power industry, chemical industry, and machinery industry.

All flanges are round disks with holes for bolts around the rim, but the commonalities end there. a projecting flat rim used for strengthening or attachment.

ASME B 16.5 2 inch socket weld (SW) flanges are used for small size and high pressure pipe systems.Stainless steel flanges are more expensive than carbon steel flanges because of the better functions.The pressures could be chosen:CL150,CL300,CL600,CL900,CL1500,CL2500.

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

orged steel flange is a disc-shaped piece of equipment used to connect a pipe to fittings or valve or other component to form a pipework system. Usually flange has been attached to pipe or tube end to, and then a gasket is inserted in the middle to form a seal. Finally they are joined together with bolts and nuts.

It is generally used in non-corrosive, non-critical, moderate pressure services. Slip on flanges of Class 150 and Class 300 are most commonly seen in utility engineering. Similar to welding neck flange, the slip on flange conforming to ASME B16.5 may generally be furnished with three facing types: raised face (RF), flat face/ full face (FF), or ring type joint (RTJ).

Slip on flange is also called SO flange.This flange can slip onto the pipes and welded with the pipes.Shanghai Zhucheng is a forged flanges supplier who supply high quality flanges for years.

300LB Stainless Steel Flange is always be chosen because of the excellent anti-corrosive function,SS316 is one of commonly used grade for stainless steel.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

Slip on flange, also called SO flange. It’s a kind of flange slides over the pipe with internal design is slightly larger than the pipe. Since the inner diameter of the flange is slightly larger than the outer diameter of the pipe, the SO flange can be directly connected to equipment or pipe by fillet weld at the top and bottom of the flange. It is used to insert the pipe into the inner hole of the flange.

Description of THD flange,what about its specification and advantages.

ASTM A182 F316 is a popular grade for stainless steel in American Standard.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

There are various material grade for ASTM A182 stainless steel flange: F304/304L/304H, 316/316L, 321, 310S, 317,347,904L， 1.4404, 1.4437.

This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

SW flange can be used in many applications in piping systems.SW Flanges are forged flanges.Socket weld flange has many classes:150LB, 300LB, 600LB, 900LB, 1500LB, 2500LB.Stainless steel flanges have better functions than other flanges which made from carbon steel or alloy steel.

The bore of the slip on will give ample amount of space for the matching pipe. This allows for enough working space for the welder and fabricator to make the connection.Slip-On flanges are commonly lower in price than weld-neck flange.

150 LB blind flange is a flange similar to plug.BL flanges are used to close the pipe system.ASTM A105 forged flange is carbon steel flange in American Matel Standard.

What is a Weld Neck Flange and its 2 different shapes

The difference between ASME/ANSI and API

There are Weld Neck Flange ( WN),Slip-on Flange (SO), Threaded Flange (THD),Socket Weld Flange (SW),Blind Flange (BL),Lap Joint Flange (LAPJ),Plate flange (PL). We also supply alloy steel flanges and stainless steel flanges .

What is a weld neck flange and its specification?