Hex Bushing – NPT Threaded 304 Stainless Steel Pipe Fitting

This is a Pipe fitting with the same size on three sides. The main pipe of these tee is different from the diameter of the branch pipe, and the diameter of the main pipe is larger than that of the branch pipe.

In general, carbon steel pipe fittings and flanges are widely used for applications which do not require materials with higher resistance to corrosion such as stainless steel and alloy steel. Carbon Steel Fittings is primarily used across piping systems for its hardness, moderate to good tensile strength and inexpensiveness.

MSS SP-97 Threadolethas the outstanding advantages of safety and reliability, cost reduction, simple construction, improved medium flow channel, series standardization, and convenient design and selection

The center lines of the two pipes connected by concentric reducers are on a straight line, mainly used for vertical pipelines; Eccentric reducers are often used in horizontal pipelines

High pressure Stainless Steel A182 Threaded Tee is used for providing branch, it can be divided into equal tee and reducing tee. The common used dimension is DN15, DN20,DN25 and DN40 for socket weld tee and threaded tee.

They have applications in many industries,including chemical processing, petroleum, refining, marine waste treatment, utilities / power generation, industrial equipment, natural gas compression and distribution industries. Tee pipe is also recommended for industrial equipment hydrodynamic system

Concentric BW reducer is a tpye of reducers,there is also eccentric reducer to choose.BW reducers used to reduce the flow of the fluids in the piping system.Stainless steel pipe fittings are popular because the superior functions.SCH 40 and SCH 80 are the commonly used wall thicknesses in butt welded fittings.

Threaded couplings could be divide into full coupling (both ends threaded) and half coupling(one end threaded,the other end welded).Forged pipe fittings dimensions are all in small size,1/8″-4″.

ASTM A105 Threaded Pipe Fittings are used for installing or repairing piping or tubing systems that convey liquid, gas, and occasionally solid materials. SA 105 fittings comes in a variety of sizes to fit the pipe they will connect. It is useful to combine, divert or reduce the flow of the water supply.

ASTM A182 F316 threaded full couplings are pipe fittings with two threaded ends.ASME B16.11 forged fittings have THD fittings and SW fittings,THD fittings have CL2000,CL3000,CL6000 to choose;SW fittings have CL3000,CL6000,CL9000 to choose.

Threadolet has the same basic design as a weldolet. However the main difference is the fitting has a female threaded connection to link to the branch connection. This makes a 90° branch and comes in full size or reducing for a straight piece of pipe

High Pressure Steel Pipe Fittings contain buttwelding pipe fittings, socked weld fittings and threaded pipe fittings. Threaded Steel Coupling is a short piece with screw in NPT or BSP ends or one end, which is available in stainless steel, alloy steel and carbon steel. The size range is DN6-DN100. There are various grade of A694 Threaded Coupling, Such as A694 F42 / 46 / 52 / 56 / 65 / 70

Carbon Steel: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L，1.4404, 1.4437.
Duplex Stainless Steel: ASTM A182 F51, F53, F44

ASTM A182 F304L forged fittings are high pressure pipe fittings which can used in many industries because of the excellent functions.DN25 threaded pipe tees are small size fittings but an indispensable part in piping systems.

The weld groove of the branch abutment is a single-sided V-shaped groove. It can be determined that the weld is a combination of butt weld (groove weld) and fillet weld.

Steel pipe elbow can be divided into 3 types as buttweld, threaded, socket weld in accordance with connection. The material specification are ASTM A234, A182, A403, A105, A694, A350, A420 and A860.

What is a threaded tee,what about its specification and its difference between a elbow.

Threadolet has the same basic design as a weldolet. The commonly used manufacturing standards of the branch stand include MSS sp-97, GB / t19326 and other standards.

What is a treaded nipple,what about its specification and its difference between coupling.

The equal cross is one kind of the pipe cross,  the equal cross means all the 4 ends of the cross are in same diameter.
The reducing cross also is called unequal pipe cross , it is the pipe cross which the four branch ends are not in the same diameters.

Carbon Steel ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L，1.4404, 1.4437.
Duplex Stainless Steel: ASTM A182 F51, F53, F44

Forged threaded elbows are very common in chemical, oil refining, petrochemical and other industries, and are also used in some other industries.

Carbon Steel A105 Threaded Tee are commonly used carbon steel grade which is used to manufacture forge piping components such as forged fittings and flange of small diameter piping, generally for piping whose nominal diameter is NPS 2 or smaller.

Steel pipe elbow can be divided into 3 types as buttweld, threaded, socket weld in accordance with connection.Threaded elbow is more convenient compare with the buttweld and socket weld elbow.

Forged threaded pipe fittings are named by its manufacturing forging process and produced according to ASME B16.11, MSS-SP-79\83\95\97 and BS3799 standards. It is a connector in between nominal bore pipes. Their material can be made of carbon steel A105 and stainless steel SS316 & 304.

Threaded coupling is used to connect two pipes with threaded connection.Forged steel pipe fittings can divided into SW (socket weld) fittings and THD (threaded) fittings.