316L 90 DEG Elbow SCH 10S
316L 90 deg elbow is a stainless steel pipe fitting which can used in chemical environment because of its an-ti corrosive function.SCH 10S is repersents to the wall thickness in butt welded fittings. Commonly used wall thickness is SCH 40 and SCH 80.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.
316L 90 DEG elbow is formed by hot forming and connects steel pipes or other pipe fittings through butt welding process. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.Schedule (SCH) 10S refers to the wall thickness of the elbow.
The end of Butt welded fittings are connected to the pipe system by butt welding.Butt weld fittings provide permanent leak-proof performance.BW fittings could made from seamless or welded pipe,and then through several processes formed to get the shape of pipe fittings.
There are two types of butt welded elbow：Long Radius(LR) and Short Radius(SR).
Long Radius Elbow
Long radius elbow refers to the pipe outer diameter with radius of curvature equal to 1.5 times, i.e R = 1.5D.
Short Radius Elbow
Short radius elbow means that its radius of curvature is equal to the outer diameter of the tube, i.e R = 1.0D.
45 degree elbow VS 90 degree elbow
- The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.
- The radius of both the 45 degree and 90 Degree long and short elbow is the same however, the center to face dimension is not equivalent due to the smaller degree of bend.
- Compared with 90 degree elbow, 45 degree elbow produces less friction and lower pressure.
|Size Range||1/2″ – 80″ / DN15 – 2000|
|Thickness Schedule||SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS|
|China Standard||GB/T12459, GB/T13401, HG/T21635/21631, SH3408/3409|
|America Standard||ANSI / ASME B16.9 / MSS SP 43|
|apan Standard||JIS B2311/2312/2313|
|Carbon Steel||Q235, 20#, 35#, 45#, 20G,ASTM A234 WPB/WPC|
|Low Temp Carbon Steel||Q345B, 16Mn, ASTM A420 WPL6|
|Pipeline Steel||ASTM A860 WPHY 42 / 46 / 56 / 60 / 65|
|Alloy Steel||ASTM A234 WP11 / WP12 / WP 5 / WP9 / WP91 / WP92,15CrMoG, 12Cr1MoVG, 12Cr5Mo, 1Cr5Mo, Cr9Mo, 10CrMo910, 12CrMo4-5|
|Stainless Steel||ASTM A403 WP304/304L/304H, 316/316L, 310S, 321, 317,347,904L|
|Duplex Stainless Steel||ASTM A815 S32205, S31803, 32750, 32760|