BSP Threadolet Forged Steel Outlet

The equal cross is one kind of the pipe cross,  the equal cross means all the 4 ends of the cross are in same diameter.
The reducing cross also is called unequal pipe cross , it is the pipe cross which the four branch ends are not in the same diameters.

High pressure tee is used for adding pipe branchs. An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.

CL3000 threaded coupling is the most used pressure of couplings.ASTM A105 forged fittings are pipe fittings in material of carbon steel.ASTM A105 specification is also including forged flanges.

Threaded tee used thread connection to combine with pipes.ASME B16.11 fittings are forged fittings belong to American Standard.Tees can divided as equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

Threaded nipple is a short piece length of pipe or tube. Its size is specified according to the length of this section of pipe and the diameter. It can be with threaded or flat ends. And both ends can be the same or different.
There are two shape : threaded one end (TOE) and threaded both end ( TBE).

Threaded Pipe Fittings Specification
Shape: Elbow,Tee, Cross, Coupling, Cap, Swage Nipple, Bushing, Plug, Nipple, Union, Hex Nipple,Threadolet.
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Range: Class 2000lbs, 3000lbs, 6000lbs
Thread Type: NPT, PT, BSPP, BSPT, PF
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

BSP Pipe Fittings Specification
Type: Elbow /Tee /Cross /Coupling /Cap/Union /Nipple /Plug /Bushing
Material: CS/LOW TEMP CS/PIPELINE STEEL/ALLOY STEEL /SS/ DUPLEX SS
Standard: ASME B16.11, BS3799
Size: 1/8IN-4IN/DN6-DN10
Rating: 2000lbs,3000lbs,6000lbs

In small diameter pipes (below DN50), reducing nipples are also often used to replace reducing joints for pipe reducing. Reducing nipples also have concentric and eccentric parts

Threaded coupling is used to connect two pipes with threaded connection.Forged steel pipe fittings can divided into SW (socket weld) fittings and THD (threaded) fittings.

We are manufacturer of High Pressure Pipe Fittings from China. Threaded fittings are available in pressure ratings 2000LB, 3000LB, and 6000LB; Threaded Coupling Dimension is 1/8″ –  4″ / DN6 – DN100.

Concentric swage nipple is mainly used for vertical pipeline. t is used to change the diameter of the pipe and connect two pipes of different sizes.

Threaded union is easy to install and disassemble so that it is popular in piping system.Threaded fitting used thread type to connect with pipes,threaded fittings have many pressures:2000,3000,6000.

They are concentric and eccentric available, with various ends. The most common types are:

PBE nipple = Plain Both Ends
BBE nipple= Beveled Both Ends
TBE nipple= Treaded Both Ends

We are the manufacturer of High Pressure Steel Pipe Fittings for China. Pipe Coupling contains Socked Coupling and Threaded Coupling.

Forged threaded elbows are very common in chemical, oil refining, petrochemical and other industries, and are also used in some other industries.

Stainless steel 90 deg threaded elbow is popular because it is easy to install or replace.ASME B16.11 forged fittings are pipe fittings according to American Standard.There are many types fot customers to choose:NPT PT BSPP BSPT PF.

Swage nipple is a common accessory in industrial pipeline connection. Common threaded short joints are divided into double head external thread, single head external thread, flat head external thread, and short joints connected by flanges.

The specification of ASTM A182 Forged Pipe Fittings includes forged fittings, stainless steel, rolled alloy, forged alloy, pipe flanges as well as high-temperature service. Later then forgings and hot working, it would be cooled down to a certain temperature before heat treatment.
The Alloy Steel A182 Threaded Elbow material grade contains ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22.

What is a Threaded Coupling,what about its specification and its advantages.

Weldolet, an economical butt-weld branch connection, is designed to minimize stress concentrations and provide integral reinforcement. manufactured to meet your specific reinforcement requirements.

Threaded Pipe Fittings Specification
Shape: Elbow,Tee, Cross, Coupling, Cap, Swage Nipple, Bushing, Plug, Nipple, Union, Hex Nipple,Threadolet.
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Rating: Class 2000lbs, 3000lbs, 6000lbs
Thread Type: NPT, PT, BSPP, BSPT, PF
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

Threaded Steel Coupling is a short piece with screw in NPT or BSP ends or one end, which is available in stainless steel, alloy steel and carbon steel. The size range is DN6-DN100.

Class 3000 hex head plugs are used in the end of piping systems or equipments to achieve close function.ASTM A182 F304 forged pipe fittings are the most common used stainless steel pipe fittings because of the reasonable price and superior functions.Threaded plugs have 3000lb and 6000lb pressures for customers to choose.