Steel Pipe 90deg Elbow LR Carbon Steel Elbow
An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180° or 90° angle, though 45° elbows are also made. The ends may be machined for butt welding (SW) or socketed welding(SW) etc.
Steel Pipe 90deg Elbow are installed between different lengths pipe or tubing. LR Carbon Steel Elbow refers to the pipe outer diameter with radius of curvature equal to 1.5 times, i.e R = 1.5D.Butt Weld 90Deg Long Radius Elbow functioned to change fluid direction by 90 degree, so also named as vertical elbow. At the same time, it is divided into long radius elbow and short radius elbow.LR 90 degree steel pipe elbow are installed between different lengths pipe or tubing. It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.SR 90 degree elbow is the same as the pipe elbow mentioned above, but the diameter is shorter. Therefore, this kind of steel elbow is often used when space is not enough.A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.
W 90 degree ELBOW
BW 90 degree elbow is formed by hot forming and connects steel pipes or other pipe fittings through butt welding process. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.
Long radius ELBOW
Long radius elbow refers to the pipe outer diameter with radius of curvature equal to 1.5 times, i.e R = 1.5D.
Short radius ELBOW
Short radius elbow means that its radius of curvature is equal to the outer diameter of the tube, i.e R = 1.0D
- High tensile strength
- Excellent corrosion resistance
- Resistance to oxidation
|Shape||Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End|
|Size Range||1/2″ – 80″ / DN15 – 2000|
|Thickness Schedule||SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS|
|China Standard||GB/T12459, GB/T13401, HG/T21635/21631, SH3408/3409|
|America Standard||ANSI / ASME B16.9 / MSS SP 43|
|apan Standard||JIS B2311/2312/2313|
|Carbon Steel||Q235, 20#, 35#, 45#, 20G,ASTM A234 WPB/WPC|
|Low Temp Carbon Steel||Q345B, 16Mn, ASTM A420 WPL6|
|Pipeline Steel||ASTM A860 WPHY 42 / 46 / 56 / 60 / 65|
|Alloy Steel||ASTM A234 WP11 / WP12 / WP 5 / WP9 / WP91 / WP92,15CrMoG, 12Cr1MoVG, 12Cr5Mo, 1Cr5Mo, Cr9Mo, 10CrMo910, 12CrMo4-5|
|Stainless Steel||ASTM A403 WP304/304L/304H, 316/316L, 310S, 321, 317,347,904L|
|Duplex Stainless Steel||ASTM A815 S32205, S31803, 32750, 32760|