ASME B16.9 45 degree LR elbow is a pipe connector with a bending angle of 45 degrees. The long diameter means that the bending radius of the elbow is relatively large. It consists of a bending part and interfaces at both ends. The size of the interface matches the outer diameter of the connected pipe to ensure a sealed connection.
A234 WPB elbow is a pipe fitting that changes the direction of carbon steel pipes. It is usually made of carbon steel and uses a bending process to process the straight pipe section into a curved pipe section with a certain angle.
The Butt Weld 45 Degree Elbow is a pipe connector in the shape of a curved pipe section with a bending angle of 45°. It consists of a curved part and straight edge parts at both ends. The radius of curvature of the curved part is an important parameter, which is usually determined according to the nominal diameter of the pipe and the use requirements.
S31254 Elbow is a pipe fitting used in pipeline systems, and its main function is to change the flow direction of the fluid in the pipeline. Common bending angles are 45°, 90° and 180°, etc.
S31803 90 degree elbow is a kind of stainless steel with two-phase structure of ferrite and austenite. It combines the high strength of ferritic stainless steel with the good toughness and corrosion resistance of austenitic stainless steel.
2”90°stainless steel elbow is a commonly used pipe fitting in the pipeline system. It is mainly used to change the direction of the pipeline, make the pipeline turn 90°, and connect two pipes with the same or different nominal diameters.
Carbon steel butt welding 90 degree elbow is a connector specially designed for use in piping systems. Its main function is to create a 90 degree turn in the pipe so that the fluid can flow along a predetermined path.
ASTM A403 Stainless Steel Butt Weld 45 Degree Elbow refers to the material of forged and rolled austenitic stainless fittings for pressure pipes. Common grades are WP304/L, WP316/L. They can be used into many fields as engineering industry, energy conversion plants etc. ASTM A403 WP304, WP316 Elbow are buttweld fittings made for austenitic stainless steel applications with forged material.
45° Pipe Elbow is also known as “45 bends or 45 ells”. The 45° pipe elbow is used to connect tubes at a 45° pipe angle. As the name suggests, this is a pipe fitting device which is bent in such a way to produce 45° change in the direction of flow of the fluid/gas in the pipe.
The function of butt weld elbow is to change direction or flow in a piping system. There are the 45°, 90° and 180° . According to the material, it can be divided into carbon steel, alloy steel and stainless-steel. According to its radius of curvature, there are long radius and short radius butt weld elbow.
ASTM A234 WPB pipe fittings are have a large size:1/2″-80″.32 in carbon steel butt welded elbow is a common used size in large size of BW elbows.
Butt weld fittings would also be referred to as welded pipe fittings. When these would be used in stainless steel and carbon steel, they would be able to offer certain advantages as compared to socket weld and threaded fittings. Whereas socket weld would only be available up to a specific size, you would find butt weld fittings to be available in sizes starting 1/2 inch to 72 inch.
90 degree elbow’s usage and its specification
ASTM A182 F304 pipe fittings are inculding many fittings,among these,stainless butt welded elbows are the most common used fittings.For 90 deg elbows,there are two types :LR (Long Radius) and SR (Short Radius).Stainless steel pipe fittings are popular because of the superior functions.
Steel pipe elbow is a key parts in a piping system for to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree or 90 degree.
A Reducing Tee is a T-shaped pipe fitting with two outlets that cut at 90 degrees to the main line. These tees are available with a combination of diverse outlet sizes. In this, the branch port size is smaller than the other ports of the run.
Carbon steel butt welded 90° elbows are belong to ASTM A234 WPB pipe fittingsBW 90 deg elbows could be made in two types:LR (Long Radius) and SR (Short Radius).The angle of pipe elbows are 45deg and 90 deg.Only 90 deg elbows have LR.
Butt weld fittings are manufacture by seamless or welded pipe. For pipe fittings manufacturers, the forming process of welded pipe and seamless pipe is basically same. Butt welded fittings can be divided into carbon steel butt welded fittings and stainless-steel butt-welded fittings
Buttwelding Fittings Specification Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End Size Range: 1/2″ – 80″ / DN15 – 2000 Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS
Butt Weld Fittings include elbows, tees, cross, caps and reduces. These fittings are the most common type of welded pipe fitting and are specified by nominal pipe size and pipe schedule. Buttweld fittings are manufacture by seamless or welded pipe and are formed to get the shape of elbows, tees and cross etc.
Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.
A234 WPB Carbon Steel Buttweld 90 Deg Elbow’s usage